By XMOS 279


XMOS' sliceKIT makes it easy to evaluate and develop with xCORE multicore microcontrollers. This flexible design kit is comprised of a core board powered by a sixteen core xCORE flexible multicore microcontroller. It supports up to four I/O slice cards, and features XMOS' 16 Core L2 Device to deliver the deterministic, responsive processing required to handle a variety of peripheral interfaces, data processing, and control tasks. Each I/O slice is supplied with a demo application allowing you to get up and running quickly. The result is a framework of peripherals and I/O providing an exact fit chip for your system.

sliceKIT Starter Kit Ethernet Slice Card
  • Core board with 16-core xCORE multicore microcontroller
  • GPIO Slice Card
  • Ethernet Slice Card
  • XTAG2 USB-JTAG debug adaptor
  • JTAG adaptor
  • Power supply
  • 10/100 Mb Ethernet phy
  • RJ45 connector (cable not included)
  • MII interface to xCORE
Audio Slice Card Display Slice Card
  • Four analog input channels via two 3.5 mm jacks
  • Four analog output channels via two 3.5 mm jacks
  • MIDI I/O
  • SPDIF output via coax
  • On-board audio clocks
  • 480 x 272 full color display
  • 40-pin ZIF connector with ribbon cable to the display
  • Resistive touch screen with 2 wire interface to xCORE
GPIO Slice Card SDRAM Slice Card
  • 4 LEDs
  • 2 buttons
  • One RS232 parallel cable with DB9 connector (cable not included)
  • 4-channel A/D via I²C interface
  • Thermistor input via A/D
  • 8 MByte SDRAM
  • Clock speed up to 50 MHz
  • Data rate up to 80 MBytes/second
Multi UART Slice Card sliceKIT Core Board
  • 8 full duplex, RS232 UARTs via IO headers
  • DB9 connector allowing RS232 parallel cable to connect to one of the UARTs (cable not included)
  • Up to 115.2 Kbaud
  • Configurable parity, stop bits, and bits per character
  • Core board with 16 core xCORE multicore microcontroller
  • Power supply
  • *JTAG adaptor and XTAG2 are not included. If you do not have these, please see the SliceKIT Starter Kit