OMO ElectronicOMO Electronic
Expand menu
Hallo, melde dich anMein Konto
0 Wagen

CLVTH16652IDGGREP

CLVTH16652IDGGREP
Mfr. #:
CLVTH16652IDGGREP
Beschreibung:
Bus Transceivers Mil Enhance 3.3V ABT 16B Bus Xcvrs & Reg
Lebenszyklus:
Neu von diesem Hersteller.
Datenblatt:
CLVTH16652IDGGREP Datenblatt
Die Zustellung:
DHL FedEx Ups TNT EMS
Zahlung:
T/T Paypal Visa MoneyGram Western Union
ECAD Model:
Mehr Informationen:
CLVTH16652IDGGREP Mehr Informationen CLVTH16652IDGGREP Product Details
Produkteigenschaft
Attributwert
Hersteller:
Texas Instruments
Produktkategorie:
Bus-Transceiver
RoHS:
Y
Logikfamilie:
16
Eingangspegel:
LVTTL
Ausgangspegel:
LVTTL
Ausgabetyp:
3-State
Ausgangsstrom auf hohem Niveau:
- 32 mA
Niedriger Ausgangsstrom:
64 mA
Ausbreitungsverzögerungszeit:
2.8 ns
Versorgungsspannung - Max.:
3.6 V
Versorgungsspannung - Min.:
2.7 V
Minimale Betriebstemperatur:
- 40 C
Maximale Betriebstemperatur:
+ 85 C
Paket / Koffer:
TSSOP-56
Verpackung:
Spule
Funktion:
Bus-Transceiver / Registrieren
Höhe:
1.15 mm
Länge:
14 mm
Anzahl Kreise:
2
Betriebstemperaturbereich:
- 40 C to + 85 C
Produkt:
BiCMOS
Serie:
SN74LVTH16652-EP
Technologie:
BiCMOS
Breite:
6.1 mm
Marke:
Texas Instruments
Montageart:
SMD/SMT
Anzahl der Kanäle:
16
Versorgungsstrom - Max.:
5 mA
Betriebsversorgungsspannung:
2.7 V to 3.6 V
Polarität:
Nicht invertiert
Produktart:
Bus-Transceiver
Werkspackungsmenge:
2000
Unterkategorie:
Logik-ICs
Auslösetyp:
Positive Kante
Teil # Aliase:
V62/04717-01XE
Gewichtseinheit:
0.008917 oz
Tags
CLVTH1, CLVTH, CLVT, CLV
Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: [email protected]

Step1: Vacuum Packaging with PL
Step1:
Vacuum Packaging with PL
Step2: Anti-Static Bag
Step2:
Anti-Static Bag
Step3: Packaging Boxes
Step3:
Packaging Boxes
***as Instruments
Enhanced Product 3.3 V Abt 16-Bit Bus Transceivers And Registers With 3-State Outputs 56-TSSOP -40 to 85
***et
Bus XCVR Dual 16-CH 3-ST 56-Pin TSSOP T/R
***i-Key
IC TXRX NON-INVERT 3.6V 56TSSOP
***ark
Transceiver Logic IC; Logic Family:LVT; Supply Voltage Min:2.7V; Supply Voltage Max:3.6V; Package/Case:56-TSSOP; No. of Pins:56; Operating Temperature Range:-40°C to +85°C; Leaded Process Compatible:Yes; No. of Bits:16 ;RoHS Compliant: Yes
***AS INSTRU
The SN74LVTH16652 is a 16-bit bus transceiver designed for low-voltage (3.3-V) VCC operation, but with the capability to provide a TTL interface to a 5-V system environment. These devices can be used as two 8-bit transceivers or one 16-bit transceiver.
***AS INSTR
Output-enable (OEAB and OEBA\) inputs are provided to control the transceiver functions. Select-control (SAB and SBA) inputs are provided to select whether real-time or stored data is transferred. A low input level selects real-time data, and a high input level selects stored data. The circuitry used for select control eliminates the typical decoding glitch that occurs in a multiplexer during the transition between stored and real-time data. Figure 1 illustrates the four fundamental bus-management functions that can be performed with the SN74LVTH16652.
***ASI
Data on the A or B bus, or both, can be stored in the internal D flip-flops by low-to-high transitions at the appropriate clock (CLKAB or CLKBA) inputs, regardless of the levels on the select-control or output-enable inputs. When SAB and SBA are in the real-time transfer mode, it also is possible to store data without using the internal D-type flip-flops by simultaneously enabling OEAB and OEBA\. In this configuration, each output reinforces its input. When all other data sources to the two sets of bus lines are at high impedance, each set of bus lines remains at its last level configuration.
***as Instr.
When VCC is between 0 and 1.5 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 1.5 V, OE\ should be tied to VCC through a pullup resistor, and OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sinking/current-sourcing capability of the driver.
***AS INSTR
Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.
***AS INSTUMENTS
This device is fully specified for hot-insertion applications using Ioff and power-up 3-state. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down, which prevents driver conflict.
Logic Solutions
OMO Electronic Logic Solutions offers a full spectrum of logic functions and technologies from the mature to the advanced, including bipolar, BiCMOS, and CMOS. TI's process technologies offer the logic performance and features required for modern logic designs, while maintaining support for more traditional logic products.Learn More
Bild Teil # Beschreibung
CLVTH16652IDGGREP

Mfr.#: CLVTH16652IDGGREP

OMO.#: OMO-CLVTH16652IDGGREP

 Bus Transceivers Mil Enhance 3.3V ABT 16B Bus Xcvrs & Reg
CLVTH16652IDGGREP

Mfr.#: CLVTH16652IDGGREP

OMO.#: OMO-CLVTH16652IDGGREP-TEXAS-INSTRUMENTS

 Neu und Original
CLVTH16646IDGGREP

Mfr.#: CLVTH16646IDGGREP

OMO.#: OMO-CLVTH16646IDGGREP-TEXAS-INSTRUMENTS

 Neu und Original
Verfügbarkeit
Aktie:
Available
Auf Bestellung:
3500
Menge eingeben:
Der aktuelle Preis von CLVTH16652IDGGREP dient nur als Referenz. Wenn Sie den besten Preis erhalten möchten, senden Sie bitte eine Anfrage oder senden Sie eine direkte E-Mail an unser Verkaufsteam [email protected]
Beginnen mit
Neueste Produkte
More Newest Products
Top