TLK3101

Mfr. #:: TLK3101
Hersteller:: TEXAS INSTRUMENT
Beschreibung:
Lebenszyklus:: Neu von diesem Hersteller.
Datenblatt:: TLK3101 Datenblatt
Die Zustellung:: DHL FedEx Ups TNT EMS
Zahlung:: T/T Paypal Visa MoneyGram Western Union
ECAD Model:

Produkteigenschaft
Attributwert

Hersteller: TEXAS-INSTRUMENT

Produktkategorie: Schnittstelle - Treiber, Empfänger, Transceiver

Serie: TLK3101

Produkt: Ethernet-Transceiver

Typ: Transceiver

Verpackung: Tray Alternative Verpackung

Gewichtseinheit: 0.008004 oz

Montageart: SMD/SMT

Paket-Koffer: HVQFP-64

Betriebstemperatur: -40°C ~ 85°C

Befestigungsart: Oberflächenmontage

Spannungsversorgung: 2.5V

Lieferanten-Geräte-Paket: 64-HVQFP

Protokoll: IEEE 802.3

Datenrate: 3.125 Gb/s

Anzahl-der-Fahrer-Empfänger: 16/16

Duplex: -

Empfänger-Hysterese: -

Maximale-Betriebstemperatur: + 85 C

Mindest-Betriebstemperatur: - 40 C

Betriebs-Versorgungsspannung: 2.5 V

Versorgungsstrom-Max: 180 mA

Versorgungsspannung-Max: 2.7 V

Versorgungsspannung-Min: 2.3 V

Anzahl-Transceiver: 1 Transceiver

Tags: TLK3101, TLK310, TLK3, TLK

Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: [email protected]

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes

TLK3101 Beschreibung

***th Star Micro: the tlk3101 is a member of the transceiver family of multigigabit transceivers intended for use in ultrahigh-speed bidirectional point-to-point data transmission systems. the tlk3101 supports an effective serial interface speed of 2.5 gbps to 3.125 gbps providing up to 2.5 gbps of data bandwidth. the tlk3101 is functionally identical to the tlk1501 a 0.6 gbps to 1.5 gbps transceiver and the tlk2501 a 1.6 gbps to 2.5 gbps transceiver providing a wide range of performance solutions with no significant board layout changes. note: the tlk3101 does have an integrated termination resistance unlike the tlk2501 and tlk1501. the primary application of this chip is to provide very high-speed i/o data channels for point-to-point baseband data transmission over controlled impedance media of approximately 50 . view all in datasheet

***as Instruments: The TLK3101 is a member of the transceiver family of multigigabit transceivers, intended for use in ultrahigh-speed bidirectional point-to-point data transmission systems. The TLK3101 supports an effective serial interface speed of 2.5 Gbps to 3.125 Gbps providing up to 2.5 Gbps of data bandwidth. The TLK3101 is functionally identical to the TLK1501, a 0.6 Gbps to 1.5 Gbps transceiver, and the TLK2501, a 1.6 Gbps to 2.5 Gbps transceiver, providing a wide range of performance solutions with no significant board layout changes. The primary application of this chip is to provide very high-speed I/O data channels for point-to-point baseband data transmission over controlled impedance media of approximately 50 . The transmission media can be printed-circuit board, copper cables, or fiber-optic cable. The maximum rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment. This device can also be used to replace parallel data transmission architectures by providing a reduction in the number of traces, connector pins, and transmit/receive pins. Parallel data loaded into the transmitter is delivered to the receiver over a serial channel, which can be a coaxial copper cable, a controlled impedance backplane, or an optical link. It is then reconstructed into its original parallel format. It offers significant power and cost savings over current solutions, as well as scalability for a higher data rate in the future. The TLK3101 performs the data parallel-to-serial, serial-to-parallel conversion, and clock extraction functions for a physical layer interface device. The serial transceiver interface operates at a maximum speed of 3.125 Gbps. The transmitter latches 16-bit parallel data at a rate based on the supplied reference clock (GTX_CLK). The 16-bit parallel data is internally encoded into 20 bits using an 8-bit/10-bit encoding format. The resulting 20-bit word is then transmitted differentially at 20 times the reference clock (GTX_CLK) rate. The receiver section performs the serial-to-parallel conversion on the input data, synchronizing the resulting 20-bit wide parallel data to the extracted reference clock (RX_CLK). It then decodes the 20 bit wide data using 8-bit/10-bit decoding format resulting in 16 bits of parallel data at the receive data pins (RXD0-15). This results in an effective data payload of 2 Gbps to 2.5 Gbps (16 bits data x GTX_CLK frequency). The TLK3101 is housed in a high-performance, thermally enhanced, 64-pin VQFP PowerPAD package. Use of the PowerPAD package does not require any special considerations except to note that the PowerPAD, which is an exposed die pad on the bottom of the device, is a metallic thermal and electrical conductor. It is recommended that the TLK3101 PowerPAD be soldered to the thermal land on the board. All ac performance specifications in this data sheet are measured with the PowerPAD soldered to the test board. The TLK3101 provides an internal loopback capability for self-test purposes. Serial data from the serializer is passed directly to the deserializer allowing the protocol device a functional self-check of the physical interface. The TLK3101 is designed to be hot plug capable. An on-chip power-on reset circuit holds the RX_CLK low during power up. Also, this circuit holds the parallel side output signal terminals as well as DOUTTXP and DOUTTXN in a high-impedance state. The TLK3101 has a loss of signal detection circuit for conditions where the incoming signal no longer has a sufficient voltage amplitude to keep the clock recovery circuit in lock. To prevent a data bit error from causing a valid data packet to be interpreted as a comma and thus causing the erroneous word alignment by the comma detection circuit, the comma word alignment circuit is turned off after the link is properly established in the TLK3101. The TLK3101 allows users to implement redundant ports by connecting receive data bus terminals from two TLK3101 devices together. Asserting LCKREFN to a low state will cause the receive data bus pins, RXD[0:15], RX_CLK, and RX_ER, RX_DV/LOS to go to a high-impedance state. This places the device in a transmit only mode since the receiver is not tracking the data. The TLK3101 uses a 2.5-V supply. The I/O section is 3 V compatible. With the 2.5-V supply the chipset is very power efficient, consuming less than 450 mW typically. The TLK3101 is characterized for operation from -40C to 85C.

Market price

Teil #	Mfg.	Beschreibung	Aktie	Preis
TLK3101IRCP DISTI # 296-10490-ND	Texas Instruments	IC XCVR 2.5-3.125GBPS 64-HVQFP RoHS: Compliant Min Qty: 160 Container: Tray	Limited Supply - Call
TLK3101IRCPG4 DISTI # TLK3101IRCPG4-ND	Texas Instruments	IC XCVR 2.5-3.125GBPS 64-HVQFP RoHS: Compliant Min Qty: 160 Container: Tray	Limited Supply - Call
TLK3101IRCP DISTI # 595-TLK3101IRCP	Texas Instruments	Ethernet ICs 2.5 to 3.125 Gbps Transceiver RoHS: Compliant	0
TLK3101IRCPG4 DISTI # 595-TLK3101IRCPG4	Texas Instruments	Ethernet ICs 2.5 to 3.125 Gbps Transceiver RoHS: Compliant	0
TLK3101IRCP	Texas Instruments	Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, PQFP64 RoHS: Compliant	5	1000:$23.0700 500:$24.2800 100:$25.2800 25:$26.3600 1:$28.3900

Verwandte Produkte

Bild	Teil #	Beschreibung
	Mfr.#: TLK10034SMAEVM OMO.#: OMO-TLK10034SMAEVM	Daughter Cards & OEM Boards SMA breakout daughterBRD
	Mfr.#: TLK2201BRCPG4 OMO.#: OMO-TLK2201BRCPG4-TEXAS-INSTRUMENTS	IC ETHRNT XCVR 1-1.6GBPS 64HVQFP
	Mfr.#: TLK2201RCPR OMO.#: OMO-TLK2201RCPR-TEXAS-INSTRUMENTS	Ethernet ICs 1.0-1.6Gbps Gigabit Ethernet Xceive
	Mfr.#: TLK1201IRCP OMO.#: OMO-TLK1201IRCP-TEXAS-INSTRUMENTS	Ethernet ICs Gig Ethernet Trans
	Mfr.#: TLK111CUSEVM OMO.#: OMO-TLK111CUSEVM-TEXAS-INSTRUMENTS	EVAL MODULE FOR TLK111CUS
	Mfr.#: TLK1201RCPR OMO.#: OMO-TLK1201RCPR-1190	Neu und Original
	Mfr.#: TLK1221RHA OMO.#: OMO-TLK1221RHA-1190	Neu und Original
	Mfr.#: TLK2201RCPRG4 OMO.#: OMO-TLK2201RCPRG4-1190	Ethernet ICs 1.0-1.6Gbps GigaB Ethernet Xceive
	Mfr.#: TLK2201RPCB OMO.#: OMO-TLK2201RPCB-1190	Neu und Original
	Mfr.#: TLK2208A OMO.#: OMO-TLK2208A-1190	Neu und Original

Verfügbarkeit

Aktie:: Available
Auf Bestellung:: 5000
Menge eingeben:

Der aktuelle Preis von TLK3101 dient nur als Referenz. Wenn Sie den besten Preis erhalten möchten, senden Sie bitte eine Anfrage oder senden Sie eine direkte E-Mail an unser Verkaufsteam [email protected]

Referenzpreis (USD)

Menge
Stückpreis
ext. Preis

1: ~~0,00 $~~; ~~0,00 $~~

10: ~~0,00 $~~; ~~0,00 $~~

100: ~~0,00 $~~; ~~0,00 $~~

500: ~~0,00 $~~; ~~0,00 $~~

1000: ~~0,00 $~~; ~~0,00 $~~

Aufgrund von Halbleiterknappheit ab 2021 ist der untere Preis der Normalpreis vor 2021. Bitte senden Sie eine Anfrage zur Bestätigung.

Beginnen mit

TLK3101 6
TLK310 12
TLK3 35
TLK 354

TLK3101

Step1:Vacuum Packaging with PL

Step2:Anti-Static Bag

Step3:Packaging Boxes

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes