LTC4304IMS#PBF

LTC4304IMS#PBF
Mfr. #:
LTC4304IMS#PBF
Hersteller:
Analog Devices Inc.
Beschreibung:
Interface - Signal Buffers, Repeaters Hot Swappable 2-Wire Bus Buf w/ Stuck Bu
Lebenszyklus:
Neu von diesem Hersteller.
Datenblatt:
LTC4304IMS#PBF Datenblatt
Die Zustellung:
DHL FedEx Ups TNT EMS
Zahlung:
T/T Paypal Visa MoneyGram Western Union
ECAD Model:
Mehr Informationen:
LTC4304IMS#PBF Mehr Informationen LTC4304IMS#PBF Product Details
Produkteigenschaft
Attributwert
Hersteller:
Analog Devices Inc.
Produktkategorie:
Schnittstelle - Signalpuffer, Repeater
RoHS:
Y
Produkt:
Puffer
Ausbreitungsverzögerungszeit:
300 ns
Maximale Taktfrequenz:
600 kHz
Betriebsversorgungsspannung:
2.7 V to 5.5 V
Minimale Betriebstemperatur:
- 40 C
Maximale Betriebstemperatur:
+ 85 C
Montageart:
SMD/SMT
Paket / Koffer:
MSOP-10
Verpackung:
Rohr
Eingabetyp:
Uhr
Ausgabetyp:
Abfluss öffnen
Serie:
LTC4304
Typ:
Hot-Swap-fähig
Marke:
Analoge Geräte
Oberflächentyp:
I2C, SMBus
Anzahl der Kanäle:
2 Channel
Ciss - Eingangskapazität:
10 pF
Betriebsversorgungsstrom:
6 mA
Produktart:
Signalpuffer, Repeater
Werkspackungsmenge:
50
Unterkategorie:
Schnittstellen-ICs
Versorgungsspannung - Max.:
5.5 V
Versorgungsspannung - Min.:
2.7 V
Gewichtseinheit:
0.003527 oz
Tags
LTC4304IM, LTC4304I, LTC4304, LTC430, LTC43, LTC4, LTC
Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: [email protected]

Step1: Vacuum Packaging with PL
Step1:
Vacuum Packaging with PL
Step2: Anti-Static Bag
Step2:
Anti-Static Bag
Step3: Packaging Boxes
Step3:
Packaging Boxes
***ear Technology
LTC4304 - Hot Swappable 2-Wire Bus Buffer with Stuck Bus Recovery
***p One Stop Global
I2C Buffer 3.3V/5V Automotive 10-Pin MSOP
***ark
Ic,Address/Data Buffer,Cmos,Tssop,10Pin,Plastic
***ment14 APAC
IC, HOTSWAP 2WIRE BUS BUFFR, 10MSOP
***i-Key
IC ACCELERATR I2C HOTSWAP 10MSOP
***ponent Distributors Inc.
I2C Bus Buffer with Stuck Bus Recovery
***hardson RFPD
INTERFACE - MISCELLANEOUS
***nell
IC, HOTSWAP 2WIRE BUS BUFFR, 10MSOP; Controller Applications:ATCA, Capacitance Buffer / Bus Extender, Live Board Insertion, Servers, RAID Systems; Internal Switch:Yes; Supply Voltage Min:2.7V; Supply Voltage Max:5.5V; Digital IC Case Style:MSOP; No. of Pins:10; Operating Temperature Min:-40°C; Operating Temperature Max:85°C; MSL:MSL 1 - Unlimited; SVHC:No SVHC (20-Jun-2013); Operating Temperature Range:-40°C to +85°C; Supply Voltage Range:2.7V to 5.5V
***log Devices
The LTC4304 hot swappable 2-wire bus buffer allows I/O card insertion into a live backplane without corruption of the data and clock busses. When a connection is made, the LTC4304 provides bidirectional buffering, keeping the backplane and card capacitances isolated. If SDAOUT or SCLOUT is low for ≥30ms (typ), the LTC4304 automatically breaks the data and clock bus connection and FAULT will pull low. At this time the LTC4304 automatically generates up to 16 clock pulses on SCLOUT in an attempt to free the bus. A connection will be enabled automatically when the bus becomes free. A logic low on the ACC input enables the LTC4304's rise-time accelerators. A logic high on ACC disables the rise-time accelerators, which allows SDA and SCL bus pull-up voltages below VCC. During insertion, the SDA and SCL lines are precharged to 1V to minimize bus disturbances. When driven high, ENABLE allows the LTC4304 to connect after a stop bit or bus idle occurs. Driving ENABLE low breaks the connection between SDAIN and SDAOUT, SCLIN and SCLOUT. READY is an open drain output that indicates when the backplane and card sides are connected together. Applications Hot Board Insertion Servers Capacitance Buffer/Bus Extender RAID Systems
Interface & Isolation ADI SLP
Bild Teil # Beschreibung
SN74LVC2G17DBVR

Mfr.#: SN74LVC2G17DBVR

OMO.#: OMO-SN74LVC2G17DBVR

Buffers & Line Drivers Dual Schmitt-Trgr
PCA9306DCTR

Mfr.#: PCA9306DCTR

OMO.#: OMO-PCA9306DCTR

Translation - Voltage Levels Dual BiDir I2C-Bus & SMBus Vltg Lvl-Trans
BTS4140N

Mfr.#: BTS4140N

OMO.#: OMO-BTS4140N

Power Switch ICs - Power Distribution Smart High Side MINI-PROFET
LTM4642IY#PBF

Mfr.#: LTM4642IY#PBF

OMO.#: OMO-LTM4642IY-PBF

Switching Voltage Regulators 20VIN, Dual 4A or Single 8A DC/DC Module Regulator
TPS74901KTWR

Mfr.#: TPS74901KTWR

OMO.#: OMO-TPS74901KTWR

LDO Voltage Regulators 3.0A LDO Linear Reg
RC0402FR-0710KL

Mfr.#: RC0402FR-0710KL

OMO.#: OMO-RC0402FR-0710KL

Thick Film Resistors - SMD 10K OHM 1%
OKY-T/3-D12N-C

Mfr.#: OKY-T/3-D12N-C

OMO.#: OMO-OKY-T-3-D12N-C-MURATA-POWER-SOLUTIONS

Non-Isolated DC/DC Converters 12Vin 0.75-5.5Vout 3A 15.3W Neg logic
SN74LVC2G17DBVR

Mfr.#: SN74LVC2G17DBVR

OMO.#: OMO-SN74LVC2G17DBVR-TEXAS-INSTRUMENTS

Buffers & Line Drivers Dual Schmitt-Trg
TPS74901KTWR

Mfr.#: TPS74901KTWR

OMO.#: OMO-TPS74901KTWR-TEXAS-INSTRUMENTS

LDO Voltage Regulators 3.0A LDO Linear Reg
PCA9306DCTR

Mfr.#: PCA9306DCTR

OMO.#: OMO-PCA9306DCTR-TEXAS-INSTRUMENTS

Translation - Voltage Levels Dual BiDir I2C-Bus & SMBus Vltg Lvl-Trans
Verfügbarkeit
Aktie:
243
Auf Bestellung:
2226
Menge eingeben:
Der aktuelle Preis von LTC4304IMS#PBF dient nur als Referenz. Wenn Sie den besten Preis erhalten möchten, senden Sie bitte eine Anfrage oder senden Sie eine direkte E-Mail an unser Verkaufsteam [email protected]
Referenzpreis (USD)
Menge
Stückpreis
ext. Preis
1
6,39 $
6,39 $
25
4,24 $
106,00 $
100
3,50 $
350,00 $
250
3,33 $
832,50 $
500
3,25 $
1 625,00 $
1000
3,13 $
3 130,00 $
Aufgrund von Halbleiterknappheit ab 2021 ist der untere Preis der Normalpreis vor 2021. Bitte senden Sie eine Anfrage zur Bestätigung.
Beginnen mit
Neueste Produkte
  • Hearing Protection
    3M's hearing protection products are some of the most recognized on the market and are designed to provide protection, comfort, and ease of use.
  • Compare LTC4304IMS#PBF
    LTC4304IMS vs LTC4304IMSPBF vs LTC4304IMSTRPBF
  • ZIP DIP Sockets
    With decades of experience on the market, 3M™ ZIP DIP sockets provide a proven, reliable test and burn-in interface for DIP Packages with .100" lead spacing, and pin counts of 14 to 64.
  • Thermally Conductive Epoxy Adhesive TC-2810
    3M™'s TC-2810 is a thermally conductive 2-part epoxy using boron nitride (BN) filler for good thermal conductivity with high adhesion.
  • 451 Series Socket Assemblies and 452 Series Board-
    3M™'s 451 series ribbon cable socket assemblies and the 452 series shrouded board-mount headers offer a current rating of 1.0 A.
  • Connector Headers and Ejectors for CFast™
    3M™'s headers and ejectors for CFast are geared towards markets where performance and system downtime are major considerations.
Top