TPS62351DRCR

TPS62351DRCR
Mfr. #:
TPS62351DRCR
Beschreibung:
Switching Voltage Regulators 1A 3MHz Buck Converter
Lebenszyklus:
Neu von diesem Hersteller.
Datenblatt:
TPS62351DRCR Datenblatt
Die Zustellung:
DHL FedEx Ups TNT EMS
Zahlung:
T/T Paypal Visa MoneyGram Western Union
ECAD Model:
Mehr Informationen:
TPS62351DRCR Mehr Informationen TPS62351DRCR Product Details
Produkteigenschaft
Attributwert
Hersteller:
Texas Instruments
Produktkategorie:
Schaltspannungsregler
RoHS:
Y
Montageart:
SMD/SMT
Paket / Koffer:
VSON-10
Ausgangsspannung:
0.9 V to 1.6875 V
Ausgangsstrom:
800 mA
Anzahl der Ausgänge:
1 Output
Eingangsspannung MAX:
5.5 V
Topologie:
Bock
Eingangsspannung MIN:
2.7 V
Schaltfrequenz:
3 MHz
Minimale Betriebstemperatur:
- 40 C
Maximale Betriebstemperatur:
+ 85 C
Serie:
TPS62351
Verpackung:
Spule
Eingangsspannung:
2.7 V to 5.5 V
Betriebstemperaturbereich:
- 40 C to + 85 C
Produkt:
Spannungsregler
Typ:
DC / DC-Wandler
Marke:
Texas Instruments
Entwicklungs-Kit:
TPS62351EVM-122
Feuchtigkeitsempfindlich:
ja
Betriebsversorgungsstrom:
28 uA
Produktart:
Schaltspannungsregler
Werkspackungsmenge:
3000
Unterkategorie:
PMIC - Power-Management-ICs
Gewichtseinheit:
0.000921 oz
Tags
TPS62351, TPS6235, TPS623, TPS62, TPS6, TPS
Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: [email protected]

Step1: Vacuum Packaging with PL
Step1:
Vacuum Packaging with PL
Step2: Anti-Static Bag
Step2:
Anti-Static Bag
Step3: Packaging Boxes
Step3:
Packaging Boxes
    W***n
    W***n
    RU

    Thank you!

    2019-03-26
    G***s
    G***s
    BY

    Fast shipping. thanks to the seller. not yet checked.

    2019-03-03
    M***v
    M***v
    RU

    Long went parcel

    2019-02-08
    K***h
    K***h
    RU

    Honest seller recommend

    2019-05-22
***as Instruments
1A, 3MHz Buck Converter with I2C for Dynamic Voltage Scaling 10-VSON -40 to 85
*** Stop Electro
Switching Regulator, Voltage-mode, 0.8A, 3350kHz Switching Freq-Max, PDSO10
***ical
Conv DC-DC 2.7V to 5.5V Synchronous Step Down Single-Out 0.9V to 1.6875V 0.8A 10-Pin VSON EP T/R
***ark
Switching Regulator IC; No. of Outputs:1; Output Voltage:1.6875V; Output Current:800mA; No. of Pins:10; Operating Temperature Range:-40°C to +85°C; Input Voltage Primary Max:5.5V; Leaded Process Compatible:Yes ;RoHS Compliant: Yes
***as Instruments
1A, 3MHz Buck Converter with I2C for Dynamic Voltage Scaling 12-DSBGA -40 to 85
***ical
Conv DC-DC 2.7V to 5.5V Synchronous Step Down Single-Out 1.5V to 1.975V 1A 12-Pin DSBGA T/R
*** Stop Electro
Switching Regulator, Voltage-mode, 1A, 3350kHz Switching Freq-Max
***ark
Switching Regulator IC; No. of Outputs:1; Output Voltage:1.975V; Output Current:1A; No. of Pins:12; Operating Temperature Range:-40°C to +85°C; Input Voltage Primary Max:5.5V; Leaded Process Compatible:Yes; Output Current Max:1A ;RoHS Compliant: Yes
***as Instruments
1A, 3MHz Buck Converter with I2C for Dynamic Voltage Scaling 12-DSBGA -40 to 85
***ical
Conv DC-DC 2.7V to 5.5V Synchronous Step Down Single-Out 1.5V to 1.975V 1A 12-Pin DSBGA T/R
***ponent Stockers USA
1.8 A SWITCHING REGULATOR 3350 kHz SWITCHING FREQ-MAX BGA12
***el Electronic
Voltage Regulators - Switching Regulators 1A 3MHz Buck Converter
*** Stop Electro
Switching Regulator, Voltage-mode, 1A, 3350kHz Switching Freq-Max
***nell
SYNC STEP-DOWN CONV 12-DSBGA; Primary Input Voltage:5.5V; No. of Outputs:1; Output Voltage:1.975V; Output Current:1A; Voltage Regulator IC Case Style:DSBGA; No. of Pins:12; Operating Temperature Range:-40°C to +85°C; SVHC:No SVHC (18-Jun-2010); Case Style:DSBGA; Base Number:62356; Frequency:3MHz; Max Adjustable Output voltage:1.975V; Max Input Voltage:5.5V; Max Output Current:1000mA; Max Output Voltage:1.975V; Max Supply Voltage:5.5V; Max Switch Output Current Isw:1800mA; Min Adjustable Output Voltage:1.5V; Min Supply Voltage:2.7V; Percentage Accuracy:2%; Termination Type:SMD; Voltage Regulator Type:Step Down (Buck)
***as Instruments
1A, 3MHz Buck Converter with I2C for Dynamic Voltage Scaling 10-VSON -40 to 85
*** Stop Electro
Switching Regulator, Voltage-mode, 0.8A, 3350kHz Switching Freq-Max, PDSO10
***ical
Conv DC-DC 2.7V to 5.5V Synchronous Step Down Single-Out 0.75V to 1.5375V 0.8A 10-Pin VSON EP T/R
***ark
DC/DC Converter; No. of Outputs:1; Output Voltage:1.5V; Output Current:1A; DC/DC Converter Mounting:PCB SMT; DC/DC Converter Type:Non-Isolated; Input Voltage Max:5.5V; Input Voltage Min:2.7V; Leaded Process Compatible:Yes ;RoHS Compliant: Yes
***ical
Conv DC-DC 2.7V to 5.5V Step Down Single-Out 0.75V to 1.4375V 1.1A 12-Pin WLCSP T/R
***emi
1.1A / 1A / 0.8A, 3MHz Digitally Programmable Regulator
***r Electronics
Switching Controller, Voltage-mode, 1.1A, 3350kHz Switching Freq-Max, PBGA12
***rchild Semiconductor
The FAN5355 device is a high-frequency, ultra-fast transient response, synchronous step-down DC-DC converter optimized for low-power applications using small, low-cost inductors and capacitors. The FAN5355 supports up to 800mA, 1A, or 1.1A load current. The device is ideal for mobile phones and similar portable applications powered by a single-cell Lithium-Ion battery. With an output-voltage range adjustable via I2C™ interface from 0.75V to 1.975V, the device supports low-voltage DSPs and processors, core power supplies, and memory modules in smart phones, PDAs, and handheld computers. The FAN5355 operates at 3MHz (nominal) fixed switching frequency using either its internal oscillator or external SYNC frequency. During light-load conditions, the regulator includes a PFM mode to enhance light-load efficiency. The regulator transitions smoothly between PWM and PFM modes with no glitches on VOUT. In hardware shutdown, the current consumption is reduced to less than 200nA. The serial interface is compatible with Fast/Standard and High-Speed mode I2C specifications, allowing transfers up to 3.4Mbps. This interface is used for dynamic voltage scaling with 12.5mV voltage steps for reprogramming the mode of operation (PFM or Forced PWM), or to disable/enable the output voltage. The chip's advanced protection features include short-circuit protection and current and temperature limits. During a sustained over-current event, the IC shuts down and restarts after a delay to reduce average power dissipation into a fault. During startup, the IC controls the output slew rate to minimize input current and output overshoot at the end of soft start. The IC maintains a consistent soft-start ramp, regardless of output load during startup. The FAN5355 is available in 10-lead MLP (3x3mm) and 12-bump CSP packages.
***r Electronics
Switching Controller, Voltage-mode, 1.8A, 3350kHz Switching Freq-Max, PBGA12
***emi
1.1A / 1A / 0.8A, 3MHz Digitally Programmable Regulator
***rchild Semiconductor
The FAN5355 device is a high-frequency, ultra-fast transient response, synchronous step-down DC-DC converter optimized for low-power applications using small, low-cost inductors and capacitors. The FAN5355 supports up to 800mA, 1A, or 1.1A load current. The device is ideal for mobile phones and similar portable applications powered by a single-cell Lithium-Ion battery. With an output-voltage range adjustable via I2C™ interface from 0.75V to 1.975V, the device supports low-voltage DSPs and processors, core power supplies, and memory modules in smart phones, PDAs, and handheld computers. The FAN5355 operates at 3MHz (nominal) fixed switching frequency using either its internal oscillator or external SYNC frequency. During light-load conditions, the regulator includes a PFM mode to enhance light-load efficiency. The regulator transitions smoothly between PWM and PFM modes with no glitches on VOUT. In hardware shutdown, the current consumption is reduced to less than 200nA. The serial interface is compatible with Fast/Standard and High-Speed mode I2C specifications, allowing transfers up to 3.4Mbps. This interface is used for dynamic voltage scaling with 12.5mV voltage steps for reprogramming the mode of operation (PFM or Forced PWM), or to disable/enable the output voltage. The chip's advanced protection features include short-circuit protection and current and temperature limits. During a sustained over-current event, the IC shuts down and restarts after a delay to reduce average power dissipation into a fault. During startup, the IC controls the output slew rate to minimize input current and output overshoot at the end of soft start. The IC maintains a consistent soft-start ramp, regardless of output load during startup. The FAN5355 is available in 10-lead MLP (3x3mm) and 12-bump CSP packages.
***et
Buck Switching Regulator IC Positive Programmable 0.75V 1 Output 800mA 10-WFDFN Exposed Pad
***emi
1.1A / 1A / 0.8A, 3MHz Digitally Programmable Regulator
***ark
Voltage Regulator IC; No. of Outputs:1; Output Voltage:1.975V; Output Current:1A; No. of Pins:10; Operating Temperature Range:-40°C to +85°C; Input Voltage Primary Max:5.5V; Leaded Process Compatible:Yes; Output Current Max:800mA ;RoHS Compliant: Yes
***rchild Semiconductor
The FAN5355 device is a high-frequency, ultra-fast transient response, synchronous step-down DC-DC converter optimized for low-power applications using small, low-cost inductors and capacitors. The FAN5355 supports up to 800mA, 1A, or 1.1A load current. The device is ideal for mobile phones and similar portable applications powered by a single-cell Lithium-Ion battery. With an output-voltage range adjustable via I2C™ interface from 0.75V to 1.975V, the device supports low-voltage DSPs and processors, core power supplies, and memory modules in smart phones, PDAs, and handheld computers. The FAN5355 operates at 3MHz (nominal) fixed switching frequency using either its internal oscillator or external SYNC frequency. During light-load conditions, the regulator includes a PFM mode to enhance light-load efficiency. The regulator transitions smoothly between PWM and PFM modes with no glitches on VOUT. In hardware shutdown, the current consumption is reduced to less than 200nA. The serial interface is compatible with Fast/Standard and High-Speed mode I2C specifications, allowing transfers up to 3.4Mbps. This interface is used for dynamic voltage scaling with 12.5mV voltage steps for reprogramming the mode of operation (PFM or Forced PWM), or to disable/enable the output voltage. The chip's advanced protection features include short-circuit protection and current and temperature limits. During a sustained over-current event, the IC shuts down and restarts after a delay to reduce average power dissipation into a fault. During startup, the IC controls the output slew rate to minimize input current and output overshoot at the end of soft start. The IC maintains a consistent soft-start ramp, regardless of output load during startup. The FAN5355 is available in 10-lead MLP (3x3mm) and 12-bump CSP packages.
***as Instruments (TI)
The TPS6235x device is a high-frequency synchronous step-down dc-dc converter optimized for battery-powered portable applications. Intended for low-power applications, the TPS6235x supports up to 800-mA load current and allows the use of small, low cost inductors and capacitors.
***NS
The device is ideal for mobile phones and similar portable applications powered by a single-cell Li-Ion battery. With an output voltage range adjustable via I2C interface down to 0.6 V, the device supports low-voltage DSPs and processors core power supplies in smart-phones, PDAs, and handheld computers.
***NS
The TPS6235x operates at 3-MHz fixed switching frequency and enters the efficiency optimized power-save mode operation at light load currents to maintain high efficiency over the entire load current range. In the shutdown mode, the current consumption is reduced to less than 2 µA.
***AS INSRUMENT
The serial interface is compatible with Fast/Standard and High-Speed mode I2C specification allowing transfers at up to 3.4 Mbps. This communication interface is used for dynamic voltage scaling with voltage steps down to 12.5 mV, for reprogramming the mode of operation (Light PFM, Fast PFM or Forced PWM) or disable/enabling the output voltage.
Teil # Beschreibung Aktie Preis
TPS62351DRCR
DISTI # 26644454
Conv DC-DC 2.7V to 5.5V Step Down Single-Out 0.9V to 1.6875V 0.8A 10-Pin VSON EP T/R
RoHS: Compliant
6000
  • 3000:$0.8650
TPS62351DRCR
DISTI # 296-22474-1-ND
IC REG BCK ADJ/PROG 800MA 10VSON
RoHS: Compliant
Min Qty: 1
Container: Cut Tape (CT)
2966In Stock
  • 1000:$0.7751
  • 500:$0.9355
  • 100:$1.1386
  • 10:$1.4170
  • 1:$1.5800
TPS62351DRCR
DISTI # 296-22474-6-ND
IC REG BCK ADJ/PROG 800MA 10VSON
RoHS: Compliant
Min Qty: 1
Container: Digi-Reel®
2966In Stock
  • 1000:$0.7751
  • 500:$0.9355
  • 100:$1.1386
  • 10:$1.4170
  • 1:$1.5800
TPS62351DRCR
DISTI # 296-22474-2-ND
IC REG BCK ADJ/PROG 800MA 10VSON
RoHS: Compliant
Min Qty: 3000
Container: Tape & Reel (TR)
Temporarily Out of Stock
  • 15000:$0.6488
  • 6000:$0.6747
  • 3000:$0.7006
TPS62351DRCRG4
DISTI # TPS62351DRCRG4-ND
IC REG BCK ADJ/PROG 800MA 10VSON
RoHS: Compliant
Min Qty: 3000
Container: Tape & Reel (TR)
Temporarily Out of Stock
  • 3000:$0.7006
TPS62351DRCR
DISTI # V39:1801_07420398
Conv DC-DC 2.7V to 5.5V Step Down Single-Out 0.9V to 1.6875V 0.8A 10-Pin VSON EP T/R
RoHS: Compliant
0
  • 3000000:$0.6245
  • 1500000:$0.6247
  • 300000:$0.6417
  • 30000:$0.6703
  • 3000:$0.6750
TPS62351DRCR
DISTI # V36:1790_07420398
Conv DC-DC 2.7V to 5.5V Step Down Single-Out 0.9V to 1.6875V 0.8A 10-Pin VSON EP T/R
RoHS: Compliant
0
  • 3000000:$0.6245
  • 1500000:$0.6247
  • 300000:$0.6417
  • 30000:$0.6703
  • 3000:$0.6750
TPS62351DRCR
DISTI # TPS62351DRCR
Conv DC-DC Single Step Down 2.7V to 5.5V 10-Pin VSON EP T/R - Tape and Reel (Alt: TPS62351DRCR)
RoHS: Compliant
Min Qty: 3000
Container: Reel
Americas - 0
  • 30000:$0.6509
  • 18000:$0.6689
  • 12000:$0.6919
  • 6000:$0.7159
  • 3000:$0.7529
TPS62351DRCR
DISTI # TPS62351DRCR
Conv DC-DC Single Step Down 2.7V to 5.5V 10-Pin VSON EP T/R (Alt: TPS62351DRCR)
RoHS: Compliant
Min Qty: 3000
Container: Tape and Reel
Europe - 0
  • 30000:€0.6329
  • 18000:€0.6779
  • 12000:€0.7909
  • 6000:€0.8629
  • 3000:€1.0549
TPS62351DRCRG4
DISTI # TPS62351DRCRG4
Conv DC-DC Single Step Down 2.7V to 5.5V 10-Pin VSON EP T/R - Tape and Reel (Alt: TPS62351DRCRG4)
RoHS: Compliant
Min Qty: 3000
Container: Reel
Americas - 0
  • 30000:$0.6509
  • 18000:$0.6689
  • 12000:$0.6919
  • 6000:$0.7159
  • 3000:$0.7529
TPS62351DRCR1A, 3MHz Buck Converter with I2C for Dynamic Voltage Scaling5900
  • 1000:$0.5900
  • 750:$0.6400
  • 500:$0.7800
  • 250:$0.9300
  • 100:$1.0100
  • 25:$1.1600
  • 10:$1.2500
  • 1:$1.4000
TPS62351DRCR
DISTI # 595-TPS62351DRCR
Switching Voltage Regulators 1A 3MHz Buck Converter
RoHS: Compliant
0
  • 3000:$0.6750
  • 9000:$0.6490
TPS62351DRCRG4
DISTI # 595-TPS62351DRCRG4
Switching Voltage Regulators 1A 3MHz Buck Converter
RoHS: Compliant
0
  • 3000:$0.6750
  • 9000:$0.6490
TPS62351DRCRG4Switching Regulator, Voltage-mode, 1.6A, 3350kHz Switching Freq-Max, PDSO10
RoHS: Compliant
3000
  • 1000:$0.6800
  • 500:$0.7200
  • 100:$0.7500
  • 25:$0.7800
  • 1:$0.8400
Bild Teil # Beschreibung
TL431CLP

Mfr.#: TL431CLP

OMO.#: OMO-TL431CLP

Voltage References Adj Shunt
TL431CLP

Mfr.#: TL431CLP

OMO.#: OMO-TL431CLP-TEXAS-INSTRUMENTS

Voltage References Adj Shunt
Verfügbarkeit
Aktie:
Available
Auf Bestellung:
5000
Menge eingeben:
Der aktuelle Preis von TPS62351DRCR dient nur als Referenz. Wenn Sie den besten Preis erhalten möchten, senden Sie bitte eine Anfrage oder senden Sie eine direkte E-Mail an unser Verkaufsteam [email protected]
Beginnen mit
Neueste Produkte
Top