OMO ElectronicOMO Electronic
Expand menu
Hallo, melde dich anMein Konto
0 Wagen

SN75ALS085DWRG4

SN75ALS085DWRG4
Mfr. #:
SN75ALS085DWRG4
Beschreibung:
Bus Transceivers Dual Driver Receiver
Lebenszyklus:
Neu von diesem Hersteller.
Datenblatt:
SN75ALS085DWRG4 Datenblatt
Die Zustellung:
DHL FedEx Ups TNT EMS
Zahlung:
T/T Paypal Visa MoneyGram Western Union
ECAD Model:
Mehr Informationen:
SN75ALS085DWRG4 Mehr Informationen SN75ALS085DWRG4 Product Details
Produkteigenschaft
Attributwert
Hersteller:
Texas Instruments
Produktkategorie:
Bus-Transceiver
RoHS:
Y
Minimale Betriebstemperatur:
0 C
Maximale Betriebstemperatur:
+ 70 C
Paket / Koffer:
SOIC-24
Verpackung:
Spule
Funktion:
Buslinien-Transceiver
Höhe:
2.35 mm
Länge:
15.4 mm
Breite:
7.52 mm
Marke:
Texas Instruments
Oberflächentyp:
IEEE-802.3
Montageart:
SMD/SMT
Produktart:
Bus-Transceiver
Werkspackungsmenge:
1
Unterkategorie:
Logik-ICs
Gewichtseinheit:
0.022025 oz
Tags
SN75ALS085DWR, SN75ALS085D, SN75ALS08, SN75ALS0, SN75AL, SN75A, SN75, SN7
Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: [email protected]

Step1: Vacuum Packaging with PL
Step1:
Vacuum Packaging with PL
Step2: Anti-Static Bag
Step2:
Anti-Static Bag
Step3: Packaging Boxes
Step3:
Packaging Boxes
***ser
Line Circuit Interface ICs Dual Driver Receiver
***i-Key
IC DRVR/RCVR DUAL INTRFAC 24SOIC
***as Instruments
The SN75ALS085 is a high-speed, advanced low-power Schottky, dual-channel driver/receiver device designed for use in the AUI of ANSI/IEEE Std 802.3-1988. The two drivers on the device drive a 78- balanced, terminated twisted-pair transmission line up to a maximum length of 50 meters. In the off (idle) state, the drivers maintain minimal differential output voltage on the twisted-pair line and, at the same time, remain within the required output common-mode range. With the driver enable (TXEN) high, upon receiving the first falling edge into the driver input, the differential outputs rise to full-amplitude output levels within 25 ns. The output amplitude is maintained for the remainder of the packet. After the last positive packet edge is transmitted into the driver, the driver maintains a minimum of 70% full differential output for a minimum of 200 ns, then decays to a minimum level for the reset (idle) condition within 8 us. Disabling the driver by taking the driver enable low also forces the output into the idle condition after the normal 8-us timeout. While operating, the drivers are able to withstand a set of fault conditions and not suffer damage due to the faults being applied. The drivers power up in the idle state to ensure that no activity is placed on the twisted-pair cable, which could be interpreted as network traffic. The line receiver squelch function interfaces to a differential twisted-pair line terminated external to the device. The receiver squelch circuit allows differential receive signals to pass through, as long as the input amplitude and pulse duration are greater than the minimum squelch threshold. This ensures a good signal-to-noise ratio while the data path is active and prevents system noise from causing false data transitions during line shutdown and line-idle conditions. The receiver outputs (RXO) default to a high level and the receiver-enable (RXEN) outputs default to a low level while the squelch function is blocking the data path through the receiver (idle). The line receiver squelch becomes active within 50 ns when the input squelch threshold is exceeded. RXEN is driven high when the squelch circuit allows data to pass through the receiver. The receiver squelch circuit also can withstand a set of fault conditions while operating, without causing permanent damage to the device. The purpose of the loop functions is to provide a means by which system data-path verification can be done to isolate faulty interfaces and assist in network diagnosis. The LOOP pins are TTL compatible and must be held high for normal operation. When LOOP1\ is taken low, the output of driver 1 (TXO1) immediately goes into the idle state. Also, the input to receiver 1 is ignored, and a path from a transmit input (TXI1) to RXO1 is established. When LOOP1\ is taken back high, driver 1 and receiver 1 revert back to their normal operation. When LOOP2\ is taken low, a similar data path is established between TXI1 and RXO2. TXEN1 must be high for the loop functions to operate, and TXEN1 can be used to gate the loop function if desired. During loop operation, the respective RXEN reflects the status of TXEN1. The SN75ALS085 is characterized for operation from 0C to 70C.
Bild Teil # Beschreibung
SN75ALS192N

Mfr.#: SN75ALS192N

OMO.#: OMO-SN75ALS192N

 RS-422 Interface IC Quad Differential Line Driver
SN75ALS176ADRG4

Mfr.#: SN75ALS176ADRG4

OMO.#: OMO-SN75ALS176ADRG4

 RS-422/RS-485 Interface IC Differential Bus Transceiver
SN75ALS162DWRG4

Mfr.#: SN75ALS162DWRG4

OMO.#: OMO-SN75ALS162DWRG4

 Bus Transceivers Octal Genral Purpose InterfacE Bus Trans
SN75ALS194NSR

Mfr.#: SN75ALS194NSR

OMO.#: OMO-SN75ALS194NSR-TEXAS-INSTRUMENTS

 RS-422 Interface IC Quad Differential Line Drive
SN75ALS192DR

Mfr.#: SN75ALS192DR

OMO.#: OMO-SN75ALS192DR-TEXAS-INSTRUMENTS

 RS-422 Interface IC Quad Differential Line Drive
SN75ALS173N

Mfr.#: SN75ALS173N

OMO.#: OMO-SN75ALS173N-TEXAS-INSTRUMENTS

 RS-422/RS-485 Interface IC Quad Diff Line
SN75ALS085DWRE4

Mfr.#: SN75ALS085DWRE4

OMO.#: OMO-SN75ALS085DWRE4-TEXAS-INSTRUMENTS

 IC DRVR/RCVR DUAL INTRFAC 24SOIC
SN75ALS176BDG4

Mfr.#: SN75ALS176BDG4

OMO.#: OMO-SN75ALS176BDG4-TEXAS-INSTRUMENTS

 IC DIFF BUS TXRX 8-SOIC
SN75ALS191DRG

Mfr.#: SN75ALS191DRG

OMO.#: OMO-SN75ALS191DRG-1190

 Neu und Original
SN75ALS197NS

Mfr.#: SN75ALS197NS

OMO.#: OMO-SN75ALS197NS-1190

 Neu und Original
Verfügbarkeit
Aktie:
Available
Auf Bestellung:
3500
Menge eingeben:
Der aktuelle Preis von SN75ALS085DWRG4 dient nur als Referenz. Wenn Sie den besten Preis erhalten möchten, senden Sie bitte eine Anfrage oder senden Sie eine direkte E-Mail an unser Verkaufsteam [email protected]
Beginnen mit
Neueste Produkte
More Newest Products
Top