AD605AR

Mfr. #:: AD605AR
Hersteller:: Analog Devices Inc.
Beschreibung:: IC OPAMP VGA 40MHZ 16SOIC
Lebenszyklus:: Neu von diesem Hersteller.
Datenblatt:: AD605AR Datenblatt
Die Zustellung:: DHL FedEx Ups TNT EMS
Zahlung:: T/T Paypal Visa MoneyGram Western Union
HTML Datasheet:: AD605AR Datasheet AD605AR Datasheet (P4-P6)AD605AR Datasheet (P7-P9)AD605AR Datasheet (P10-P12)AD605AR Datasheet (P13-P15)AD605AR Datasheet (P16-P18)AD605AR Datasheet (P19-P21)AD605AR Datasheet (P22-P24)AD605AR Datasheet (P25)
ECAD Model:
Mehr Informationen:: AD605AR Mehr Informationen AD605AR Product Details

Produkteigenschaft
Attributwert

Tags: AD605AR, AD605A, AD605, AD60, AD6

Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: [email protected]

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes

AD605AR Beschreibung

***et: SP Amp Variable Gain Amp Dual 5.5V 16-Pin SOIC N Tube

***S: French Electronic Distributor since 1988

***ponent Stockers USA: SPECIALTY ANALOG CIRCUIT PDSO16

*** Americas: DRAM LO-NOISE DUAL-CH WBND VGA

***log Devices: The AD605 is a low noise, accurate, dual-channel, linear-in-dB variable gain amplifier (VGA), optimized for any application requiring high performance, wide bandwidth variable gain control. Operating from a single 5 V supply, the AD605 provides differential inputs and unipolar gain control for ease of use. Added flexibility is achieved with a user-determined gain range and an external reference input that provide user-determined gain scaling (dB/V). The high performance linear-in-dB response of the AD605 is achieved with the differential input, single-supply, exponential amplifier (DSX-AMP) architecture. Each of the DSX-AMPs comprises a variable attenuator of 0 dB to -48.4 dB followed by a high speed, fixed-gain amplifier. The attenuator is based on a 7-stage R-1.5R ladder network. The attenuation between tap points is 6.908 dB, and 48.360 dB for the entire ladder network. The DSX-AMP architecture results in 1.8 nV/vHz input noise spectral density and accepts a ±2.0 V input signal when VOCM is biased at VP/2. Each independent channel of the AD605 provides a gain range of 48 dB that can be optimized for the application. Gain ranges between -14 dB to +34 dB and 0 dB to +48 dB can be selected by a single resistor between Pin FBK and Pin OUT. The lower and upper gain ranges are determined by shorting Pin FBK to Pin OUT or leaving Pin FBK unconnected, respectively. The two channels of the AD605 can be cascaded to provide 96 dB of very accurate gain range in a monolithic package. The gain control interface provides an input resistance of approximately 2 MO and scale factors from 20 dB/V to 30 dB/V for a VREF input voltage of 2.5 V to 1.67 V, respectively. Note that scale factors up to 40 dB/V are achievable with reduced accuracy for scales above 30 dB/V. The gain scales linearly in dB with control voltages (VGN) of 0.4 V to 2.4 V for the 20 dB/V scale and 0.20 V to 1.20 V for the 40 dB/V scale. When VGN is <50 mV, the amplifier is powered down to draw 1.9 mA. Under normal operation, the quiescent supply current of each amplifier channel is only 18 mA. The AD605 is available in a 16-lead PDIP and a 16-lead SOIC_N package and is guaranteed for operation over the -40°C to +85°C temperature range. Applications Ultrasound and sonar time-gain controls High performance AGC systems Signal measurement Data Sheet, Rev. E, 5/07

***et: SP Amp Variable Gain Amp Dual 5.5V 16-Pin SOIC N T/R

***th Star Micro: IC AMP VGA DUAL LN 40MA 16SOIC

*** Electronic Components: Special Purpose Amplifiers Dual Low Noise SGL-Supply VGA

***log Devices: The AD605 is a low noise, accurate, dual-channel, linear-in-dB variable gain amplifier (VGA), optimized for any application requiring high performance, wide bandwidth variable gain control. Operating from a single 5 V supply, the AD605 provides differential inputs and unipolar gain control for ease of use. Added flexibility is achieved with a user-determined gain range and an external reference input that provide user-determined gain scaling (dB/V). The high performance linear-in-dB response of the AD605 is achieved with the differential input, single-supply, exponential amplifier (DSX-AMP) architecture. Each of the DSX-AMPs comprises a variable attenuator of 0 dB to -48.4 dB followed by a high speed, fixed-gain amplifier. The attenuator is based on a 7-stage R-1.5R ladder network. The attenuation between tap points is 6.908 dB, and 48.360 dB for the entire ladder network. The DSX-AMP architecture results in 1.8 nV/vHz input noise spectral density and accepts a ±2.0 V input signal when VOCM is biased at VP/2. Each independent channel of the AD605 provides a gain range of 48 dB that can be optimized for the application. Gain ranges between -14 dB to +34 dB and 0 dB to +48 dB can be selected by a single resistor between Pin FBK and Pin OUT. The lower and upper gain ranges are determined by shorting Pin FBK to Pin OUT or leaving Pin FBK unconnected, respectively. The two channels of the AD605 can be cascaded to provide 96 dB of very accurate gain range in a monolithic package. The gain control interface provides an input resistance of approximately 2 MO and scale factors from 20 dB/V to 30 dB/V for a VREF input voltage of 2.5 V to 1.67 V, respectively. Note that scale factors up to 40 dB/V are achievable with reduced accuracy for scales above 30 dB/V. The gain scales linearly in dB with control voltages (VGN) of 0.4 V to 2.4 V for the 20 dB/V scale and 0.20 V to 1.20 V for the 40 dB/V scale. When VGN is <50 mV, the amplifier is powered down to draw 1.9 mA. Under normal operation, the quiescent supply current of each amplifier channel is only 18 mA. The AD605 is available in a 16-lead PDIP and a 16-lead SOIC_N package and is guaranteed for operation over the -40°C to +85°C temperature range. Applications Ultrasound and sonar time-gain controls High performance AGC systems Signal measurement Data Sheet, Rev. E, 5/07

***th Star Micro: IC AMP VGA DUAL LN 40MA 16SOIC

*** Electronic Components: Special Purpose Amplifiers Dual Low Noise SGL-Supply VGA

***et: SOIC LO-NOISE DUAL-CH WBND VGA

***ponent Stockers USA: SPECIALTY ANALOG CIRCUIT PDSO16

***log Devices: The AD605 is a low noise, accurate, dual-channel, linear-in-dB variable gain amplifier (VGA), optimized for any application requiring high performance, wide bandwidth variable gain control. Operating from a single 5 V supply, the AD605 provides differential inputs and unipolar gain control for ease of use. Added flexibility is achieved with a user-determined gain range and an external reference input that provide user-determined gain scaling (dB/V). The high performance linear-in-dB response of the AD605 is achieved with the differential input, single-supply, exponential amplifier (DSX-AMP) architecture. Each of the DSX-AMPs comprises a variable attenuator of 0 dB to -48.4 dB followed by a high speed, fixed-gain amplifier. The attenuator is based on a 7-stage R-1.5R ladder network. The attenuation between tap points is 6.908 dB, and 48.360 dB for the entire ladder network. The DSX-AMP architecture results in 1.8 nV/vHz input noise spectral density and accepts a ±2.0 V input signal when VOCM is biased at VP/2. Each independent channel of the AD605 provides a gain range of 48 dB that can be optimized for the application. Gain ranges between -14 dB to +34 dB and 0 dB to +48 dB can be selected by a single resistor between Pin FBK and Pin OUT. The lower and upper gain ranges are determined by shorting Pin FBK to Pin OUT or leaving Pin FBK unconnected, respectively. The two channels of the AD605 can be cascaded to provide 96 dB of very accurate gain range in a monolithic package. The gain control interface provides an input resistance of approximately 2 MO and scale factors from 20 dB/V to 30 dB/V for a VREF input voltage of 2.5 V to 1.67 V, respectively. Note that scale factors up to 40 dB/V are achievable with reduced accuracy for scales above 30 dB/V. The gain scales linearly in dB with control voltages (VGN) of 0.4 V to 2.4 V for the 20 dB/V scale and 0.20 V to 1.20 V for the 40 dB/V scale. When VGN is <50 mV, the amplifier is powered down to draw 1.9 mA. Under normal operation, the quiescent supply current of each amplifier channel is only 18 mA. The AD605 is available in a 16-lead PDIP and a 16-lead SOIC_N package and is guaranteed for operation over the -40°C to +85°C temperature range. Applications Ultrasound and sonar time-gain controls High performance AGC systems Signal measurement Data Sheet, Rev. E, 5/07

***ark: IC,Voltage Controlled Gain Amplifier,DUAL,SOP,16PIN,PLASTIC

***th Star Micro: IC AMP VGA DUAL LN 40MA 16SOIC

*** Electronic Components: Special Purpose Amplifiers Dual Low Noise SGL-Supply VGA

***et: SOIC LO-NOISE DUAL-CH WBND VGA

***log Devices: The AD605 is a low noise, accurate, dual-channel, linear-in-dB variable gain amplifier (VGA), optimized for any application requiring high performance, wide bandwidth variable gain control. Operating from a single 5 V supply, the AD605 provides differential inputs and unipolar gain control for ease of use. Added flexibility is achieved with a user-determined gain range and an external reference input that provide user-determined gain scaling (dB/V). The high performance linear-in-dB response of the AD605 is achieved with the differential input, single-supply, exponential amplifier (DSX-AMP) architecture. Each of the DSX-AMPs comprises a variable attenuator of 0 dB to -48.4 dB followed by a high speed, fixed-gain amplifier. The attenuator is based on a 7-stage R-1.5R ladder network. The attenuation between tap points is 6.908 dB, and 48.360 dB for the entire ladder network. The DSX-AMP architecture results in 1.8 nV/vHz input noise spectral density and accepts a ±2.0 V input signal when VOCM is biased at VP/2. Each independent channel of the AD605 provides a gain range of 48 dB that can be optimized for the application. Gain ranges between -14 dB to +34 dB and 0 dB to +48 dB can be selected by a single resistor between Pin FBK and Pin OUT. The lower and upper gain ranges are determined by shorting Pin FBK to Pin OUT or leaving Pin FBK unconnected, respectively. The two channels of the AD605 can be cascaded to provide 96 dB of very accurate gain range in a monolithic package. The gain control interface provides an input resistance of approximately 2 MO and scale factors from 20 dB/V to 30 dB/V for a VREF input voltage of 2.5 V to 1.67 V, respectively. Note that scale factors up to 40 dB/V are achievable with reduced accuracy for scales above 30 dB/V. The gain scales linearly in dB with control voltages (VGN) of 0.4 V to 2.4 V for the 20 dB/V scale and 0.20 V to 1.20 V for the 40 dB/V scale. When VGN is <50 mV, the amplifier is powered down to draw 1.9 mA. Under normal operation, the quiescent supply current of each amplifier channel is only 18 mA. The AD605 is available in a 16-lead PDIP and a 16-lead SOIC_N package and is guaranteed for operation over the -40°C to +85°C temperature range. Applications Ultrasound and sonar time-gain controls High performance AGC systems Signal measurement Data Sheet, Rev. E, 5/07

Market price

Teil #	Mfg.	Beschreibung	Aktie	Preis
AD605ARZ DISTI # V99:2348_06209176	Analog Devices Inc	SP Amp Variable Gain Amp Dual 5.5V 16-Pin SOIC N Tube RoHS: Compliant	5	144:$17.2700 48:$18.9300 1:$21.3200
AD605ARZ-RL DISTI # V36:1790_06209182	Analog Devices Inc	SP Amp Variable Gain Amp Dual 5.5V 16-Pin SOIC N T/R RoHS: Compliant	0	1250000:$14.0000 250000:$14.1900 25000:$14.5000 2500:$14.5500
AD605ARZ-R7 DISTI # V36:1790_06209179	Analog Devices Inc	SP Amp Variable Gain Amp Dual 5.5V 16-Pin SOIC N T/R RoHS: Compliant	0	500000:$14.0000 100000:$14.1900 10000:$14.5000 1000:$14.5500
AD605ARZ DISTI # V36:1790_06209176	Analog Devices Inc	SP Amp Variable Gain Amp Dual 5.5V 16-Pin SOIC N Tube RoHS: Compliant	0
AD605ARZ-R7 DISTI # AD605ARZ-R7CT-ND	Analog Devices Inc	IC OPAMP VGA 2 CIRCUIT 16SOIC RoHS: Compliant Min Qty: 1 Container: Cut Tape (CT)	2170In Stock	100:$18.7853 10:$21.9990 1:$23.8500
AD605ARZ-R7 DISTI # AD605ARZ-R7DKR-ND	Analog Devices Inc	IC OPAMP VGA 2 CIRCUIT 16SOIC RoHS: Compliant Min Qty: 1 Container: Digi-Reel®	2170In Stock	100:$18.7853 10:$21.9990 1:$23.8500
AD605ARZ-R7 DISTI # AD605ARZ-R7TR-ND	Analog Devices Inc	IC OPAMP VGA 2 CIRCUIT 16SOIC RoHS: Compliant Min Qty: 1000 Container: Tape & Reel (TR)	1000In Stock	1000:$15.5984
AD605ARZ DISTI # AD605ARZ-ND	Analog Devices Inc	IC OPAMP VGA 2 CIRCUIT 16SOIC RoHS: Compliant Min Qty: 1 Container: Tube	301In Stock	144:$18.2382 48:$20.3979 10:$21.3580 1:$23.1600
AD605AR DISTI # AD605AR-ND	Analog Devices Inc	IC OPAMP VGA 2 CIRCUIT 16SOIC RoHS: Not compliant Min Qty: 20 Container: Tube	Limited Supply - Call
AD605AR-REEL DISTI # AD605AR-REEL-ND	Analog Devices Inc	IC OPAMP VGA 2 CIRCUIT 16SOIC RoHS: Not compliant Min Qty: 2500 Container: Tape & Reel (TR)	Limited Supply - Call
AD605AR-REEL7 DISTI # AD605AR-REEL7-ND	Analog Devices Inc	IC OPAMP VGA 2 CIRCUIT 16SOIC RoHS: Not compliant Min Qty: 750 Container: Tape & Reel (TR)	Limited Supply - Call
AD605ARZ-RL DISTI # AD605ARZ-RLTR-ND	Analog Devices Inc	IC OPAMP VGA 2 CIRCUIT 16SOIC RoHS: Compliant Min Qty: 2500 Container: Tape & Reel (TR)	Temporarily Out of Stock	2500:$15.1185
AD605ARZ DISTI # 33960107	Analog Devices Inc	SP Amp Variable Gain Amp Dual 5.5V 16-Pin SOIC N Tube RoHS: Compliant	15	1:$16.5209
AD605ARZ DISTI # 27555453	Analog Devices Inc	SP Amp Variable Gain Amp Dual 5.5V 16-Pin SOIC N Tube RoHS: Compliant	5	1:$21.3200
AD605ARZ DISTI # 84W7408	Analog Devices Inc	VGA, DUAL, 5V, 40MHZ, 16SOIC,No. of Channels:2Channels,No. of Amplifiers:1 Amplifier,Bandwidth:40MHz,Operating Temperature Min:-40°C,Operating Temperature Max:85°C,Supply Voltage Range:4.5V to 5.5V,Amplifier Case Style:NSOIC,RoHS Compliant: Yes	0
AD605AR DISTI # 584-AD605AR	Analog Devices Inc	Special Purpose Amplifiers Dual Low Noise SGL-Supply VGA RoHS: Not compliant	0
AD605ARZ DISTI # 584-AD605ARZ	Analog Devices Inc	Special Purpose Amplifiers Dual Low Noise SGL-Supply VGA RoHS: Compliant	157	1:$21.3900 5:$20.6700 10:$19.9300 25:$18.9700 50:$18.2800 100:$17.3000 250:$16.0000 500:$15.1200
AD605ARZ-R7 DISTI # 584-AD605ARZ-R7	Analog Devices Inc	Special Purpose Amplifiers Dual Low Noise SGL-Supply VGA RoHS: Compliant	0	1000:$14.5500
AD605ARZ-RL DISTI # 584-AD605ARZ-R	Analog Devices Inc	Special Purpose Amplifiers Dual Low Noise SGL-Supply VGA RoHS: Compliant	0	2500:$14.5500
AD605AR-REEL7 DISTI # 584-AD605AR-R7	Analog Devices Inc	Special Purpose Amplifiers Dual Low Noise SGL-Supply VGA RoHS: Not compliant	0
AD605AR-REEL DISTI # 584-AD605AR-R	Analog Devices Inc	Special Purpose Amplifiers Dual Low Noise SGL-Supply VGA RoHS: Not compliant	0
AD605AR	Analog Devices Inc	Analog Circuit, 2 Func, PDSO16 RoHS: Not Compliant	2929	1000:$18.7900 500:$19.7800 100:$20.5900 25:$21.4700 1:$23.1300
AD605AR-REEL7	Analog Devices Inc	Analog Circuit, 2 Func, PDSO16 RoHS: Not Compliant	750	1000:$18.7900 500:$19.7800 100:$20.5900 25:$21.4700 1:$23.1300
AD605AR-REEL	Analog Devices Inc	Analog Circuit, 2 Func, PDSO16 RoHS: Not Compliant	19930	1000:$18.7900 500:$19.7800 100:$20.5900 25:$21.4700 1:$23.1300
AD605ARZ	Analog Devices Inc	Analog Circuit, 2 Func, PDSO16 RoHS: Compliant	50	1000:$15.6300 500:$16.4500 100:$17.1300 25:$17.8700 1:$19.2400
AD605ARZ DISTI # 5237566P	Analog Devices Inc	AD605ARZ, TU	16	24:£15.4500 10:£16.0200
AD605ARZ DISTI # 5237566	Analog Devices Inc	AD605ARZ, EA	18	24:£15.4500 10:£16.0200 1:£16.5800
AD605AR	Analog Devices Inc		16
AD605AR	Analog Devices Inc	VOLTAGE CONTROLLED GAIN AMPLIFIER, 16 Pin, Plastic, SOP	2	1:$15.0000
AD605AR	Analog Devices Inc	VOLTAGE CONTROLLED GAIN AMPLIFIER, 16 Pin, Plastic, SOP	63	42:$23.0622 20:$24.4188 1:$27.1320
AD605AR-REEL7	Analog Devices Inc		600	477:$20.3490 231:$21.0273 1:$27.1320
AD605ARZ DISTI # AD605ARZ	Analog Devices Inc	LINEAR ICS, OTHER RoHS: Compliant	0	48:$16.6000 100:$16.1600 500:$15.7400 1000:$15.5300
AD605ARZ DISTI # C1S103100647008	Analog Devices Inc	SP Amp Variable Gain Amp Dual 5.5V 16-Pin SOIC N Tube RoHS: Compliant	47	10:$18.2000 1:$18.4000
AD605ARZ DISTI # 2305642	Analog Devices Inc	VGA, DUAL, 5V, 40MHZ, 16SOIC RoHS: Compliant	0	50:£14.1600 25:£14.7000 10:£15.4500 5:£16.0200 1:£16.5800

Verwandte Produkte

Bild	Teil #	Beschreibung
	Mfr.#: AD620BN OMO.#: OMO-AD620BN	Instrumentation Amplifiers Low Drift Low Power
	Mfr.#: AD627AR-REEL OMO.#: OMO-AD627AR-REEL-ANALOG-DEVICES-INC-ADI	Instrumentation Amplifiers SGL & Dual Supply RR
	Mfr.#: AD627ARZ-R7 OMO.#: OMO-AD627ARZ-R7-ANALOG-DEVICES-INC-ADI	Instrumentation Amplifiers SGL & Dual Supply RR
	Mfr.#: AD667JNZ OMO.#: OMO-AD667JNZ-ANALOG-DEVICES-INC-ADI	Digital to Analog Converters - DAC MPU-Compatible IC 12-BIT
	Mfr.#: AD6121ACP/AD6122ACP OMO.#: OMO-AD6121ACP-AD6122ACP-1190	Neu und Original
	Mfr.#: AD6507ATE OMO.#: OMO-AD6507ATE-1190	Neu und Original
	Mfr.#: AD6510 OMO.#: OMO-AD6510-1190	Neu und Original
	Mfr.#: AD664TE/883B-C OMO.#: OMO-AD664TE-883B-C-1190	Neu und Original
	Mfr.#: AD608ARZ-RL OMO.#: OMO-AD608ARZ-RL-ANALOG-DEVICES-INC-ADI	RF Mixer Mixer/Limiter/RSSI 3V Rcvr IF Subsystem
	Mfr.#: AD6-C250 OMO.#: OMO-AD6-C250-1190	Relay SSR 50mA 1.4V DC-IN 0.05A 250V AC/DC-OUT 6-Pin PDIP Tube

Verfügbarkeit

Aktie:: Available
Auf Bestellung:: 1000
Menge eingeben:

Der aktuelle Preis von AD605AR dient nur als Referenz. Wenn Sie den besten Preis erhalten möchten, senden Sie bitte eine Anfrage oder senden Sie eine direkte E-Mail an unser Verkaufsteam [email protected]

Referenzpreis (USD)

Menge
Stückpreis
ext. Preis

1: ~~0,00 $~~; ~~0,00 $~~

10: ~~0,00 $~~; ~~0,00 $~~

100: ~~0,00 $~~; ~~0,00 $~~

500: ~~0,00 $~~; ~~0,00 $~~

1000: ~~0,00 $~~; ~~0,00 $~~

Aufgrund von Halbleiterknappheit ab 2021 ist der untere Preis der Normalpreis vor 2021. Bitte senden Sie eine Anfrage zur Bestätigung.

Beginnen mit

AD605AR 12
AD605A 14
AD605 27
AD60 200
AD6 2176

Neueste Produkte

Hearing Protection

3M's hearing protection products are some of the most recognized on the market and are designed to provide protection, comfort, and ease of use.
ZIP DIP Sockets

With decades of experience on the market, 3M™ ZIP DIP sockets provide a proven, reliable test and burn-in interface for DIP Packages with .100" lead spacing, and pin counts of 14 to 64.
Thermally Conductive Epoxy Adhesive TC-2810

3M™'s TC-2810 is a thermally conductive 2-part epoxy using boron nitride (BN) filler for good thermal conductivity with high adhesion.
451 Series Socket Assemblies and 452 Series Board-

3M™'s 451 series ribbon cable socket assemblies and the 452 series shrouded board-mount headers offer a current rating of 1.0 A.
Connector Headers and Ejectors for CFast™

3M™'s headers and ejectors for CFast are geared towards markets where performance and system downtime are major considerations.

More Newest Products

AD605AR

Step1:Vacuum Packaging with PL

Step2:Anti-Static Bag

Step3:Packaging Boxes

Step1:
Vacuum Packaging with PL

Step2:
Anti-Static Bag

Step3:
Packaging Boxes