OMO ElectronicOMO Electronic
Expand menu
Hallo, melde dich anMein Konto
0 Wagen

ADM1272-1ACPZ-RL

ADM1272-1ACPZ-RL
Mfr. #:
ADM1272-1ACPZ-RL
Hersteller:
Analog Devices Inc.
Beschreibung:
Hot Swap Voltage Controllers 54V HOTSWAP AND POWER MONITOR
Lebenszyklus:
Neu von diesem Hersteller.
Datenblatt:
ADM1272-1ACPZ-RL Datenblatt
Die Zustellung:
DHL FedEx Ups TNT EMS
Zahlung:
T/T Paypal Visa MoneyGram Western Union
ECAD Model:
Mehr Informationen:
ADM1272-1ACPZ-RL Mehr Informationen ADM1272-1ACPZ-RL Product Details
Produkteigenschaft
Attributwert
Hersteller:
Analog Devices Inc.
Produktkategorie:
Hot-Swap-Spannungsregler
RoHS:
Y
Produkt:
Controller & Schalter
Derzeitige Begrenzung:
Programmierbar
Versorgungsspannung - Max.:
80 V
Versorgungsspannung - Min.:
16 V
Anzahl der Kanäle:
1 Channel
Betriebsversorgungsstrom:
6 mA
Minimale Betriebstemperatur:
- 40 C
Maximale Betriebstemperatur:
+ 105 C
Montageart:
SMD/SMT
Paket / Koffer:
LFCSP-48
Verpackung:
Spule
Serie:
ADM1272
Marke:
Analoge Geräte
Eingangs-/Versorgungsspannung - Max:
80 V
Eingangs-/Versorgungsspannung - Min:
16 V
Entwicklungs-Kit:
EVAL-ADM1272EBZ
Pd - Verlustleistung:
-
Produktart:
Hot-Swap-Spannungsregler
Werkspackungsmenge:
2500
Unterkategorie:
PMIC - Power-Management-ICs
Tags
ADM127, ADM12, ADM1, ADM
Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: [email protected]

Step1: Vacuum Packaging with PL
Step1:
Vacuum Packaging with PL
Step2: Anti-Static Bag
Step2:
Anti-Static Bag
Step3: Packaging Boxes
Step3:
Packaging Boxes
    M***l
    M***l
    PK

    why you squeeze and wound the wire like a ball?.... its all a mess when unwinding this making a straight wire...it could easily broken...

    2019-06-24
    A***n
    A***n
    RU

    It came quickly. I did not try it.

    2019-07-25
    J***s
    J***s
    PT

    Very well packaged. thank you!

    2019-07-18
***ical
Hot Swap Controller 1-CH 80V 48-Pin LFCSP EP T/R
***ark
54V Hotswap And Power Monitor
***i-Key
IC HOT SWAP CTRLR GP 48LFCSP
***hardson RFPD
POWER MANAGEMENT IC
***log Devices
The ADM1272 is a hot swap controller that allows a circuit board to be removed from or inserted into a live backplane. It also features current, voltage, and power readback via an integrated 12-bit analog-to-digital converter (ADC), accessed using a PMBus™ interface. This device is able to withstand up to 120 V, which makes it very robust in surviving surges and transients commonly associated with high voltage systems, usually clamped using protection devices such as transient voltage suppressors (TVSs) that can often exceed 100 V. The load current, ILOAD, is measured using an internal current sense amplifier that measures the voltage across a sense resistor in the power path via the SENSE+ and SENSE− pins. A default current limit sense voltage of 30 mV is set, but this limit can be adjusted down, if required, using a resistor divider network from the VCAP regulator output voltage to the ISET pin. An additional resistor can also be placed from ISET to VIN (or VOUT) to allow the current limit to track inversely with the rail voltage. This resistor allows an approximate system power limit to be used. The ADM1272 limits the current through the sense resistor by controlling the gate voltage of an external N channel field effect transistor (FET) in the power path. The sense voltage, and therefore the load current, is maintained below the preset maximum. The ADM1272 protects the external FET by monitoring and limiting the energy transfer through the FET while the current is being controlled. This energy limit is set by the choice of components connected to the EFAULT pin (for fault protection mode) and the ESTART pin during startup. Therefore, different energy limits can be set for start-up and normal fault conditions. During startup, inrush currents are maintained very low and different areas of the safe operating area (SOA) curve are of interest, whereas during fault conditions, the currents can be much higher. The controller uses the drain to source voltage (VDS) across the FET to set the current profile of the EFAULT and ESTART pins and, therefore, the amount of much energy allowed to be transferred in the FET. This energy limit ensures the MOSFET remains within the SOA limits. Optionally, use a capacitor on the DVDT pin to set the output voltage ramp rate, if required. In case of a short-circuit event, a fast internal overcurrent detector responds in hundreds of ns and signals the gate to shut down. A 1.5 A pull-down device ensures a fast FET response. The gate then recovers control within 50 µs to ensure minimal disruption during conditions, such as line steps and surges. The ADM1272 features overvoltage (OV) and undervoltage (UV) protection, programmed using external resistor dividers on the UVH, UVL, and OV pins. The use of two pins for undervoltage allows independent accurate rising and falling thresholds. The PWRGD output pin signals when the output voltage is valid and the gate is sufficiently enhanced. The validity of VOUT is determined using the PWGIN pin. The 12-bit ADC measures the voltage across the sense resistor, the supply voltage on the SENSE+ pin, the output voltage, and the temperature using an external NPN/PNP device. A PMBus interface allows a controller to read data from the ADC. As many as 16 unique I2C addresses can be selected, depending on how the two ADRx pins are connected. The ADM1272 is available in a custom 48-lead LFCSP (7 mm × 8 mm) with a pinstrap mode that allows the device to be configured for automatic retry or latchoff when an overcurrent (OC) fault occurs. Applications 48 V/54 V systems Servers Power monitoring and control/power budgeting Central office equipment Telecommunication and data communication equipment Industrial applications
Power Management ADI SLP
Teil # Mfg. Beschreibung Aktie Preis
ADM1272-1ACPZ-RL
DISTI # V36:1790_17590702		Analog Devices IncPOWER MANAGEMENT IC0
  • 1250000:$10.5800
  • 250000:$10.7200
  • 25000:$10.9500
  • 2500:$10.9900
ADM1272-1ACPZ-RL
DISTI # ADM1272-1ACPZ-RL-ND		Analog Devices IncIC HOT SWAP CTRL PMBUS 48LFCSP
RoHS: Compliant
Min Qty: 2500
Container: Tape & Reel (TR)		Temporarily Out of Stock
  • 2500:$11.5964
ADM1272-1ACPZ
DISTI # 584-ADM1272-1ACPZ		Analog Devices IncHot Swap Voltage Controllers 54V HOTSWAP AND POWER MONITOR
RoHS: Compliant		147
  • 1:$18.8300
  • 10:$17.0900
  • 25:$16.0600
  • 50:$15.4700
  • 100:$13.9100
  • 250:$12.8500
  • 500:$12.0800
ADM1272-1ACPZ-RL
DISTI # 584-ADM1272-1ACPZ-RL		Analog Devices IncHot Swap Voltage Controllers 54V HOTSWAP AND POWER MONITOR
RoHS: Compliant		0
  • 2500:$10.9900
ADM1272-1ACPZ-RL
DISTI # ADM1272-1ACPZ-R		Analog Devices IncPOWER MANAGEMENT IC
RoHS: Compliant		0
  • 2500:$11.7300
Bild Teil # Beschreibung
EVAL-ADM1272EBZ

Mfr.#: EVAL-ADM1272EBZ

OMO.#: OMO-EVAL-ADM1272EBZ

 Power Management IC Development Tools EVALUATION BOARD
EVAL-ADM1272EBZ

Mfr.#: EVAL-ADM1272EBZ

OMO.#: OMO-EVAL-ADM1272EBZ-ANALOG-DEVICES

 EVALUATION BOARD
Verfügbarkeit
Aktie:
Available
Auf Bestellung:
4500
Menge eingeben:
Der aktuelle Preis von ADM1272-1ACPZ-RL dient nur als Referenz. Wenn Sie den besten Preis erhalten möchten, senden Sie bitte eine Anfrage oder senden Sie eine direkte E-Mail an unser Verkaufsteam [email protected]
Beginnen mit
Neueste Produkte
More Newest Products
Top