PartNumber | MAX6455UT26S+T | MAX6455UT26L+T | MAX6455UT16S+T |
Description | Supervisory Circuits Dual uPower Reset Circuit | Supervisory Circuits Microprocessor Supervisors with Separate VCC Reset and Manual Reset Options | Supervisory Circuits Dual uPower Reset Circuit |
Manufacturer | Maxim Integrated | Maxim Integrated | Maxim Integrated |
Product Category | Supervisory Circuits | Supervisory Circuits | PMIC - Supervisors |
RoHS | Y | Y | - |
Type | Voltage Supervisory | - | Multi-Voltage Supervisor |
Mounting Style | SMD/SMT | - | SMD/SMT |
Package / Case | SOT-23-6L | - | - |
Threshold Voltage | 1.8 V to 5 V | - | 1.8 V to 5 V |
Number of Inputs Monitored | 1 Input | - | 1 Input |
Output Type | Active Low, Push-Pull | - | Active Low Push-Pull |
Manual Reset | Manual Reset | - | Manual Reset |
Watchdog Timers | No Watchdog | - | No Watchdog |
Battery Backup Switching | No Backup | - | No Backup |
Reset Delay Time | 280 ms | - | 280 ms |
Supply Voltage Max | 5.5 V | - | - |
Minimum Operating Temperature | - 40 C | - | - 40 C |
Maximum Operating Temperature | + 85 C | - | + 85 C |
Series | MAX6455 | - | MAX6455 |
Packaging | Reel | Reel | Cut Tape (CT) |
Height | 1.1 mm | - | - |
Length | 2.9 mm | - | - |
Width | 1.63 mm | - | - |
Brand | Maxim Integrated | Maxim Integrated | - |
Overvoltage Threshold | Adjustable | - | Adjustable |
Undervoltage Threshold | Adjustable | - | Adjustable |
Chip Enable Signals | No Chip Enable | - | No Chip Enable |
Operating Supply Current | 7 uA | - | 7 uA |
Pd Power Dissipation | 696 mW | - | - |
Power Fail Detection | No | - | No |
Product Type | Supervisory Circuits | Supervisory Circuits | - |
Factory Pack Quantity | 2500 | 2500 | - |
Subcategory | PMIC - Power Management ICs | PMIC - Power Management ICs | - |
Supply Voltage Min | 1 V | - | - |
Part # Aliases | MAX6455 | - | MAX6455 |
Package Case | - | - | SOT-23-6L |
Operating Temperature | - | - | -40°C ~ 85°C (TA) |
Mounting Type | - | - | Surface Mount |
Supplier Device Package | - | - | SOT-23-6 |
Output | - | - | Push-Pull, Totem Pole |
Reset | - | - | Active Low |
Number of Voltages Monitored | - | - | 2 |
Reset Timeout | - | - | 140 ms Minimum |
Voltage Threshold | - | - | 1.575V, Adj |
Pd Power Dissipation | - | - | 696 mW |
Supply Voltage Max | - | - | 5.5 V |
Supply Voltage Min | - | - | 1 V |