OMO ElectronicOMO Electronic
Expand menu
Hallo, melde dich anMein Konto
0 Wagen

CLVTH16543MDLREP

CLVTH16543MDLREP
Mfr. #:
CLVTH16543MDLREP
Beschreibung:
Bus Transceivers Mil Enhance 3.3V ABT 16B Registered Xcvr
Lebenszyklus:
Neu von diesem Hersteller.
Datenblatt:
CLVTH16543MDLREP Datenblatt
Die Zustellung:
DHL FedEx Ups TNT EMS
Zahlung:
T/T Paypal Visa MoneyGram Western Union
ECAD Model:
Mehr Informationen:
CLVTH16543MDLREP Mehr Informationen CLVTH16543MDLREP Product Details
Produkteigenschaft
Attributwert
Hersteller:
Texas Instruments
Produktkategorie:
Bus-Transceiver
RoHS:
Y
Logikfamilie:
LVT
Eingangspegel:
LVTTL
Ausgangspegel:
LVTTL
Ausgabetyp:
3-State
Ausgangsstrom auf hohem Niveau:
- 32 mA
Niedriger Ausgangsstrom:
64 mA
Ausbreitungsverzögerungszeit:
6.5 ns
Versorgungsspannung - Max.:
3.6 V
Versorgungsspannung - Min.:
2.7 V
Minimale Betriebstemperatur:
- 55 C
Maximale Betriebstemperatur:
+ 125 C
Paket / Koffer:
SSOP-56
Verpackung:
Spule
Funktion:
Verriegelter Transceiver
Höhe:
2.59 mm
Länge:
18.41 mm
Anzahl Kreise:
2
Betriebstemperaturbereich:
- 55 C to + 125 C
Produkt:
BiCMOS
Serie:
SN74LVTH16543-EP
Technologie:
BiCMOS
Breite:
7.49 mm
Marke:
Texas Instruments
Montageart:
SMD/SMT
Anzahl der Kanäle:
16
Versorgungsstrom - Max.:
5 mA
Betriebsversorgungsspannung:
3.3 V
Polarität:
Nicht invertiert
Produktart:
Bus-Transceiver
Werkspackungsmenge:
1000
Unterkategorie:
Logik-ICs
Teil # Aliase:
V62/04715-02YE
Gewichtseinheit:
0.024508 oz
Tags
CLVTH165, CLVTH1, CLVTH, CLVT, CLV
Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: [email protected]

Step1: Vacuum Packaging with PL
Step1:
Vacuum Packaging with PL
Step2: Anti-Static Bag
Step2:
Anti-Static Bag
Step3: Packaging Boxes
Step3:
Packaging Boxes
***as Instruments
Enhanced Product 3.3-V Abt 16-Bit Registered Transceiver With 3-State Outputs 56-SSOP -55 to 125
***et
Bus XCVR Dual 16-CH 3-ST 56-Pin SSOP T/R
***i-Key
IC TXRX NON-INVERT 3.6V 56SSOP
***ark
Transceiver Logic IC; Logic Family:LVT; Supply Voltage Min:2.7V; Supply Voltage Max:3.6V; Package/Case:56-SSOP; No. of Pins:56; Operating Temperature Range:-55°C to +125°C; Leaded Process Compatible:Yes; No. of Bits:16 ;RoHS Compliant: Yes
***as Instruments (TI)
The SN74LVTH16543 is a 16–bit registered transceiver designed for low–voltage (3.3–V) VCC operation, but with the capability to provide a TTL interface to a 5–V system environment. This device can be used as two 8–bit transceivers or one 16–bit transceiver. Separate latch–enable (LEAB or LEBA) and output–enable (OEAB or OEBA) inputs are provided for each register to permit independent control in either direction of data flow.
***AS INSRUMENT
The A–to–B enable (CEAB) input must be low to enter data from A or to output data from B. If CEAB is low and LEAB is low, the A–to–B latches are transparent; a subsequent low–to–high transition of LEAB puts the A latches in the storage mode. With CEAB and OEAB both low, the 3–state B outputs are active and reflect the data present at the output of the A latches. Data flow from B to A is similar, but requires using the CEBA, LEBA, and OEBA inputs.
***AS USD
Active bus–hold circuitry is provided to hold unused or floating data inputs at a valid logic level.
***AS INS
When VCC is between 0 and 1.5 V, the device is in the high–impedance state during power up or power down. However, to ensure the high–impedance state above 1.5 V, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current–sinking capability of the driver.
***AS INSTRUM
This device is fully specified for hot–insertion applications using Ioff and power–up 3–state. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. The power–up 3–state circuitry places the outputs in the high–impedance state during power up and power down, which prevents driver conflict.
Logic Solutions
OMO Electronic Logic Solutions offers a full spectrum of logic functions and technologies from the mature to the advanced, including bipolar, BiCMOS, and CMOS. TI's process technologies offer the logic performance and features required for modern logic designs, while maintaining support for more traditional logic products.Learn More
Bild Teil # Beschreibung
CLVTH16543IDGGREP

Mfr.#: CLVTH16543IDGGREP

OMO.#: OMO-CLVTH16543IDGGREP

 Bus Transceivers Mil Enhance 3.3V ABT 16B Registered Xcvr
CLVTH16543MDLREP

Mfr.#: CLVTH16543MDLREP

OMO.#: OMO-CLVTH16543MDLREP

 Bus Transceivers Mil Enhance 3.3V ABT 16B Registered Xcvr
CLVTH16501IDGGREP

Mfr.#: CLVTH16501IDGGREP

OMO.#: OMO-CLVTH16501IDGGREP

 Universal Bus Functions Mil Enhance 3.3V ABT 18B Univ Bus Xcvrs
CLVTH16543MDLREP

Mfr.#: CLVTH16543MDLREP

OMO.#: OMO-CLVTH16543MDLREP-TEXAS-INSTRUMENTS

 Neu und Original
CLVTH16543IDGGREP

Mfr.#: CLVTH16543IDGGREP

OMO.#: OMO-CLVTH16543IDGGREP-TEXAS-INSTRUMENTS

 Neu und Original
CLVTH16501IDGGREP

Mfr.#: CLVTH16501IDGGREP

OMO.#: OMO-CLVTH16501IDGGREP-TEXAS-INSTRUMENTS

 Neu und Original
CLVTH16500IDGGREP

Mfr.#: CLVTH16500IDGGREP

OMO.#: OMO-CLVTH16500IDGGREP-TEXAS-INSTRUMENTS

 Neu und Original
Verfügbarkeit
Aktie:
Available
Auf Bestellung:
3500
Menge eingeben:
Der aktuelle Preis von CLVTH16543MDLREP dient nur als Referenz. Wenn Sie den besten Preis erhalten möchten, senden Sie bitte eine Anfrage oder senden Sie eine direkte E-Mail an unser Verkaufsteam [email protected]
Beginnen mit
Neueste Produkte
More Newest Products
Top