CLVTH16543IDGGREP

CLVTH16543IDGGREP
Mfr. #:
CLVTH16543IDGGREP
Beschreibung:
Bus Transceivers Mil Enhance 3.3V ABT 16B Registered Xcvr
Lebenszyklus:
Neu von diesem Hersteller.
Datenblatt:
CLVTH16543IDGGREP Datenblatt
Die Zustellung:
DHL FedEx Ups TNT EMS
Zahlung:
T/T Paypal Visa MoneyGram Western Union
ECAD Model:
Mehr Informationen:
CLVTH16543IDGGREP Mehr Informationen CLVTH16543IDGGREP Product Details
Produkteigenschaft
Attributwert
Hersteller:
Texas Instruments
Produktkategorie:
Bus-Transceiver
RoHS:
Y
Logikfamilie:
16
Eingangspegel:
LVTTL
Ausgangspegel:
LVTTL
Ausgabetyp:
3-State
Ausgangsstrom auf hohem Niveau:
- 32 mA
Niedriger Ausgangsstrom:
64 mA
Ausbreitungsverzögerungszeit:
2.3 ns
Versorgungsspannung - Max.:
3.6 V
Versorgungsspannung - Min.:
2.7 V
Minimale Betriebstemperatur:
- 55 C
Maximale Betriebstemperatur:
+ 125 C
Paket / Koffer:
TSSOP-56
Verpackung:
Spule
Funktion:
Verriegelter Transceiver
Höhe:
1.15 mm
Länge:
14 mm
Anzahl Kreise:
2
Betriebstemperaturbereich:
- 55 C to + 125 C
Produkt:
BiCMOS
Serie:
SN74LVTH16543-EP
Technologie:
BiCMOS
Breite:
6.1 mm
Marke:
Texas Instruments
Montageart:
SMD/SMT
Anzahl der Kanäle:
16
Versorgungsstrom - Max.:
5 mA
Betriebsversorgungsspannung:
2.7 V to 3.6 V
Polarität:
Nicht invertiert
Produktart:
Bus-Transceiver
Werkspackungsmenge:
2000
Unterkategorie:
Logik-ICs
Teil # Aliase:
V62/04715-01XE
Gewichtseinheit:
0.008917 oz
Tags
CLVTH165, CLVTH1, CLVTH, CLVT, CLV
Service Guarantees

We guarantee 100% customer satisfaction.

Quality Guarantees

We provide 90-360 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.
Our experienced sales team and tech support team back our services to satisfy all our customers.

we buy and manage excess electronic components, including excess inventory identified for disposal.
Email us if you have excess stock to sell.

Email: [email protected]

Step1: Vacuum Packaging with PL
Step1:
Vacuum Packaging with PL
Step2: Anti-Static Bag
Step2:
Anti-Static Bag
Step3: Packaging Boxes
Step3:
Packaging Boxes
    D***k
    D***k
    RU

    I guess i was lucky. Very quickly received despite the may holidays. May 11 in the mailbox found. Pleasantly surprised. Everything works, took to repair the gas handle on the electric bike.

    2019-05-11
    I***v
    I***v
    RU

    At first glance, everything is fine, if after checking something does not suit, i will write...

    2019-04-03
    D***i
    D***i
    RU

    Everything works!

    2019-01-20
    A***i
    A***i
    MA

    Mercii

    2019-04-05
***as Instruments
Enhanced Product 3.3-V Abt 16-Bit Registered Transceiver With 3-State Outputs 56-TSSOP -40 to 85
*** Stop Electro
Registered Bus Transceiver, LVT Series, 2-Func, 8-Bit, True Output, BICMOS, PDSO56
***ark
IC, REGISTERED TRANSCEIVER, TSSOP-56
***et
Bus XCVR Dual 16-CH 3-ST 56-Pin TSSOP T/R
***i-Key
IC TXRX NON-INVERT 3.6V 56TSSOP
***estock Electronics HK limited
IC 16BIT REG TXRX 3ST 56-TSSOP
***
The SN74LVTH16543 is a 16–bit registered transceiver designed for low–voltage (3.3–V) VCC operation, but with the capability to provide a TTL interface to a 5–V system environment. This device can be used as two 8–bit transceivers or one 16–bit transceiver. Separate latch–enable (LEAB or LEBA) and output–enable (OEAB or OEBA) inputs are provided for each register to permit independent control in either direction of data flow.
***as Instruments (TI)
The A–to–B enable (CEAB) input must be low to enter data from A or to output data from B. If CEAB is low and LEAB is low, the A–to–B latches are transparent; a subsequent low–to–high transition of LEAB puts the A latches in the storage mode. With CEAB and OEAB both low, the 3–state B outputs are active and reflect the data present at the output of the A latches. Data flow from B to A is similar, but requires using the CEBA, LEBA, and OEBA inputs.
***AS INST
Active bus–hold circuitry is provided to hold unused or floating data inputs at a valid logic level.
***ASI
When VCC is between 0 and 1.5 V, the device is in the high–impedance state during power up or power down. However, to ensure the high–impedance state above 1.5 V, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current–sinking capability of the driver.
***AS INSTRUMENTS INC
This device is fully specified for hot–insertion applications using Ioff and power–up 3–state. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. The power–up 3–state circuitry places the outputs in the high–impedance state during power up and power down, which prevents driver conflict.
Logic Solutions
OMO Electronic Logic Solutions offers a full spectrum of logic functions and technologies from the mature to the advanced, including bipolar, BiCMOS, and CMOS. TI's process technologies offer the logic performance and features required for modern logic designs, while maintaining support for more traditional logic products.Learn More
Bild Teil # Beschreibung
CLVTH16543IDGGREP

Mfr.#: CLVTH16543IDGGREP

OMO.#: OMO-CLVTH16543IDGGREP

Bus Transceivers Mil Enhance 3.3V ABT 16B Registered Xcvr
CLVTH16543MDLREP

Mfr.#: CLVTH16543MDLREP

OMO.#: OMO-CLVTH16543MDLREP

Bus Transceivers Mil Enhance 3.3V ABT 16B Registered Xcvr
CLVTH16501IDGGREP

Mfr.#: CLVTH16501IDGGREP

OMO.#: OMO-CLVTH16501IDGGREP

Universal Bus Functions Mil Enhance 3.3V ABT 18B Univ Bus Xcvrs
CLVTH16543MDLREP

Mfr.#: CLVTH16543MDLREP

OMO.#: OMO-CLVTH16543MDLREP-TEXAS-INSTRUMENTS

Neu und Original
CLVTH16543IDGGREP

Mfr.#: CLVTH16543IDGGREP

OMO.#: OMO-CLVTH16543IDGGREP-TEXAS-INSTRUMENTS

Neu und Original
CLVTH16501IDGGREP

Mfr.#: CLVTH16501IDGGREP

OMO.#: OMO-CLVTH16501IDGGREP-TEXAS-INSTRUMENTS

Neu und Original
CLVTH16500IDGGREP

Mfr.#: CLVTH16500IDGGREP

OMO.#: OMO-CLVTH16500IDGGREP-TEXAS-INSTRUMENTS

Neu und Original
Verfügbarkeit
Aktie:
Available
Auf Bestellung:
1985
Menge eingeben:
Der aktuelle Preis von CLVTH16543IDGGREP dient nur als Referenz. Wenn Sie den besten Preis erhalten möchten, senden Sie bitte eine Anfrage oder senden Sie eine direkte E-Mail an unser Verkaufsteam [email protected]
Referenzpreis (USD)
Menge
Stückpreis
ext. Preis
1
3,31 $
3,31 $
10
2,98 $
29,80 $
100
2,43 $
243,00 $
250
2,28 $
570,00 $
500
2,07 $
1 035,00 $
1000
1,75 $
1 750,00 $
Aufgrund von Halbleiterknappheit ab 2021 ist der untere Preis der Normalpreis vor 2021. Bitte senden Sie eine Anfrage zur Bestätigung.
Beginnen mit
Neueste Produkte
Top