UMFT234XD Modules

By FTDI, Future Technology Devices International Ltd 325

UMFT234XD Modules

FTDI's UMFT234XD breakout module utilizes FTDI's FT234XD IC to convert USB to UART. These modules do not have a USB connector. Instead, the modules plug directly into the USB host connector, and the pads of the PCB make electrical contact with the electrical contacts of the USB connector. The UART interface operates at +3.3 V voltage levels. However, all I/Os are 5 V tolerant.

The module includes USB to UART with four control-bus lines, 3.3 V power out limited to 50 mA, and 5 V safety fuse. UART signals are available via 8 pads on the PCB.

Driver Support for Royalty-Free VIRTUAL COM PORT (VCP) and Royalty-Free D2XX Direct Drivers
  • Windows 8 32-bit, 64-bit
  • Windows 7 32-bit, 64-bit
  • Windows Vista
  • Windows XP 32-bit, 64-bit
  • Windows XP Embedded
  • Windows CE.NET 4.2, 5.0 and 6.0
  • MAC OS OS-X
  • Linux 3.0 and greater
  • Android

The drivers listed below are all free to download.

VCP Drivers: http://www.ftdichip.com/Drivers/VCP.htm

Direct Drivers: http://www.ftdichip.com/Drivers/D2XX.htm

Kategorien

Top