Raspberry Pi's Raspberry Pi 3 is a great device for learning, coding, and creating your own projects.
By Raspberry Pi 1336
Texas Instruments' CSD95377Q4M NexFET™ power stage used in a high power, high-density synchronous buck converter in a small 3.5 mm x 4.5 mm outline package.
By Texas Instruments 676
Texas Instruments' DAC8562T device is a low-power, voltage-output, dual-channel, 16-bit digital-to-analog converter (DAC) in VSSOP-10 and WSON-10 packages.
By Texas Instruments 1170
Texas Instruments' ADS9110 is an 18-bit, 2 MSPS, SAR ADC with ±0.5 LSB INL and 100 dB SNR specifications under typical operating conditions in a VQFN package.
By Texas Instruments 1799
Texas Instruments' ADC344x are a high-linearity, ultra-low power, quad-channel, 14-bit, 25 MSPS to 125 MSPS, analog-to-digital converter (ADC) family.
By Texas Instruments 932
Texas Instruments' ADC342x are a high-linearity, ultra-low power, quad-channel, 12-bit, 25 MSPS to 125 MSPS, analog-to-digital converter (ADC) family.
By Texas Instruments 1128
VersaLogic's Fox is an excellent solution for industrial and medical applications that need a lower-power solution, considerable on-board I/O, and moderate processing power.
By VersaLogic Corporation 1329
MikroElektronika’s Flip and Click is Arduino’s close cousin. This board shares a lot of Arduino’s DNA but it has a tendency to flip.
By MikroElektronika 1545
Intel®'s MAX® 10 FPGA 10M50 evaluation kit is intended as an entry-level board for evaluation of the MAX 10 FPGA technology and Enpirion® PowerSoC regulators.
By Intel® FPGAs 1446
Texas Instruments' TPS65986 is a USB Type-C and power delivery (PD) controller providing cable plug and orientation detection at the USB Type-C connector.
By Texas Instruments 814
Texas Instruments' TUSB321AI allows USB Type-C ports with the configuration channel logic needed for Type-C ecosystems and operates over a wide supply range.
By Texas Instruments 1148
Texas Instruments' TPS62097 are synchronous step-down converters optimized for high efficiency and noise critical applications in a 2 mm x 2 mm VQFN package.
By Texas Instruments 779
Texas Instruments' OPA1622 achieves a 2.8 nV/√Hz noise density with an ultralow THD+N of -119.2 dB at 1 kHz, while driving a 32 Ω load at 100 mW output power.
By Texas Instruments 788
Texas Instruments' OPA2625 op amp is a 16- and 18-bit, SAR ADC driver that is high precision with low THD and noise allow for a unique power-scalable solution.
By Texas Instruments 841
Texas Instruments' TPS7A84 is a low-noise (4.4 µVRMS), low-dropout linear regulator (LDO) capable of sourcing 3 A with only 180 mV of maximum dropout.
By Texas Instruments 866
Texas Instruments' TMDS171 is a digital video interface (DVI) or high-definition multimedia interface (HDMI) retimer that supports signaling rates up to 3.4 Gbps.
By Texas Instruments 943
Echelon's FT 6000 family of smart transceivers is the system-on-chips for modernizing and consolidating smart control networks and is for IZoT™ applications.
By Echelon Corporation 1099
Texas Instruments' OPA4192 op amps are for high-voltage industrial applications and are available in standard packages, specified from -40°C to 125°C.
By Texas Instruments 793
ON Semiconductor's FSL4110LR PWM controller and 1,000 V avalanche rugged SenseFET is designed for high input voltage offline SMPS with minimal external components.
By ON Semiconductor 957
Spansion/Cypress introduces thier S34ML08G1, NAND flash memory which is offered in 3.3 Vcc with a x8 I/O interface provides the most cost effective solution for the solid-state, mass-storage marke
By Cypress Semiconductor Corp 709