APEM's TS series thumbstick features non-contacting Hall effect technology and multiple linear output options including single- and dual-outputs.
By APEM Inc. 1686
The EL series of AC and DC output SSRs from Crydom feature output termination via 0.25" quick connect terminal and 0.187" quick connect input terminals.
By Sensata Technologies – Crydom 1562
Designed to disconnect 12 or 24 volt battery systems from their loads when the battery voltage falls below a pre-selected DC voltage
By Sensata Technologies – Crydom 1591
Features an LED input status indicator and zero-crossing (resistive loads) or random-fire (inductive loads) output.
By Sensata Technologies – Crydom 1480
Designed for harsh environments and available with either AC or DC input control voltages
By Sensata Technologies – Crydom 1767
Allows for attachment to an external heat sink to achieve full output ratings in a 40°C ambient temperature
By Sensata Technologies – Crydom 1374
These DC power relays enable DC load interruption at a high voltage and high current, which allows downsizing and non-polarization in the main contact circuit.
By Omron Electronics Inc-EMC Div 863
Standex Meder Electronics' reed switches are available in several sizes, are used in many industries, and have properties that allow it to operate in harsh environments.
By Standex-Meder Electronics 1692
Fully sealed to withstand insertion shock, wave solder temperatures, and board washing, the 210 Series Switches from CTS are economical AUTO-DIP Switches for use in numerous industrial and consume
By CTS Electronic Components 2127
The SN series T-Bar fader controller from APEM features precision ball-bearing and PTFE guides, 12-bit resolutions, and analog voltage or PWM output options.
By APEM Inc. 1630
Schurter's metal pushbutton switches with latching action are vandal-proof with raised actuators.
By SCHURTER Inc. 1184
The AQY2xx series from Panasonic features low CxR and improved on-resistance within three progressively smaller packages.
By Panasonic 1102
With an ergonomic, panel-mount design, the R7 Series of rocker switches offers solder, screw, or fast-on termination options.
By E-Switch 1618
Nidec Copal Electronics' CJS and CAS series are jumper switches specifically designed for replacement of jumper pins or for function setting switches on the PCB.
By Nidec Copal Electronics 944
C&K's JSX series features extended electrical and mechanical life for digital consumer electronic applications.
By C&K 1304
Designed as 'fit and function' alternatives, secure and reliable keypads that can be used for a variety of keytop options from Storm Interface.
By Storm Interface 1547
Crouzet offers many varieties of IP-rated switches for high-dust and -water exposed applications, and are intended for harsh-environment applications.
By Crouzet Controls 2901
Crouzet offers a wide variety of switching ratings (0.1 to 20 A) and a choice of many different actuators as standard, cUL approval.
By Crouzet Controls 2914
220 series is used in servers, circuit breakers, security systems, HVAC systems, and is also ideal for industrial, communication, and video applications.
By CTS Electronic Components 2100
APEM's KL and KR series of sealed rocker switches feature a large actuator surface and safety locking mechanisms.
By APEM Inc. 1661