ADuM3190 and ADuM4190 isolated error amplifiers are based on ADI's iCoupler technology and are ideal for linear feedback power supplies.
By Analog Devices Inc 70
Apex's PA85 high-voltage, high-power bandwidth MOSFET op amps feature a high slew rate of 1000 V/μS and 200 mA high output current.
By Apex Microtechnology 99
Apex Microtechnology's PA95 MOSFET op amps drive continuous output currents up to 100 mA and pulse currents up to 200 mA.
By Apex Microtechnology 75
Apex Microtechnology's PA03 power op amps feature a MO-127, copper, power-dip package, high internal power dissipation to 500 W, and internal SOA protection.
By Apex Microtechnology 75
Apex Microtechnology's PA12 high-voltage, very-high-output current op amp is designed to drive resistive, inductive, and capacitive loads.
By Apex Microtechnology 289
Apex Microtechnology's PA92, high-voltage, low-quiescent-current MOSFET op amp is designed as a low-cost solution for driving continuous output and pulse currents.
By Apex Microtechnology 126
The MachXO2 family of PLDs offer designers of low density PLDs an unprecedented mix of low cost, low power and high system integration in a single device.
By Lattice Semiconductor Corporation 102
AD8338 variable gain amplifiers for applications with low noise requirement include additional circuits to enable offset correction and AGC.
By Analog Devices Inc 50
ADA4661-2 and ADA4666-2 RRIO operational amplifiers are dual, rail-to-rail input/output for applications including current monitors and active filters.
By Analog Devices Inc 53
Linear Technology's LT6016 and LT6017 amplifiers combine high-precision with the ruggedness and versatility of LTC’s unique Over-the-Top architecture.
By Analog Devices Inc 404
The ADL5544/55 and ADL5610/11 RF/IF gain blocks provide a gain of 17-24 dB and are available in SOT-89 package.
By Analog Devices Inc 53
TI's INA199A1 series of voltage output current shunt monitors are highly accurate and have a wide common-mode range of -0.3 to 26 V.
By Texas Instruments 76
Analog Devices' 4th Quarter Select Products include ADCs, switches, op amps, and more.
By Analog Devices Inc 60
The MAAP-011027 amplifier in lead-free, 5 mm, 20-lead, PQFN package for point-to-point radios and C-band radar applications.
By MacomTechnology Solutions 140
The ADA4700-1 high-voltage, single-channel op amp is designed for applications requiring both AC and DC precision performance.
By Analog Devices Inc 51
TI's OPA172 operational amplifier series can be used with the OPAx171 and OPAx170 to provide bandwidth, noise, and power options for a variety of applications.
By Texas Instruments 110
The device's wide operating range enables the TLV271, from Diodes, to support an array of battery- and low-powered consumer and industrial products.
By Diodes Incorporated 86
The HMC857LC5 is easy to use, protocol agnostic, avoids complex programming, and is ideal for driving and receiving high-speed signals through backplanes
By Analog Devices Inc 80
TI's highly efficient Class-D audio power amplifiers also offer advanced battery current measurement and an integrated Class-G boost converter.
By Texas Instruments 83
STMicroelectronics' nanopower op amps optimize power budgets and battery lifetime by providing ultra-low power consumption over a wide temperature range.
By STMicroelectronics 111