Susumu's RGT series metal thin-film chip resistors are ideal for applications that require high temperature such as automotive, aerospace, and industrial.
By Susumu 312
IDT's XA series of automotive oscillators are precision crystal oscillators with 750 fs to 890 fs typical phase jitter over 12 kHz to 20 MHz bandwidth.
By IDT, Integrated Device Technology Inc 78
Maxwell’s 3 volt ultracapacitor cells are designed to provide energy storage in support of the latest trends in renewable energy, smart grid, and IoT.
By Maxwell Technologies Inc 182
Tecate's 3 V TPLH series offers a low-ESR solution for high-power applications with cell values ranging from 100 F to 450 F.
By Tecate Group 91
Vishay Dale’s WSBS and WSBM current sense resistors feature tapped holes option to aid in PCB mounting, a location to attach voltage sense pins, or both.
By Vishay/Dale 292
Tecate's TPLH series of ultracapacitors range in value from 1.5 F to 120 F and are UL recognized and RoHS and REACH compliant.
By Tecate Group 76
IDT's ProXO series quartz-based PLL oscillators focus on noise reduction technologies.
By IDT, Integrated Device Technology Inc 94
The B32354S3 series of AC filter capacitors from TDK Corporation (EPCOS) are UL 810 approved at the component level and carry the CE mark.
By EPCOS 153
Vishay's high-quality metal case resistors (MCRs) with high power-to-size ratio and all-welded construction are fully potted in a flameproof inorganic compound.
By Vishay/Dale 277
ECS' ECS-5032MV SMD, low-power, MultiVolt crystal oscillators are designed for applications such as IoT, industrial, and wireless devices.
By ECS Inc 141
TDK’s TFM-ALD series thin-film power inductors are magnetically shielded with a metal core and are designed for use in power circuits of small mobile devices.
By TDK Corporation 62
AVX's TCB series is used in demanding industrial applications requiring very low ESR with stable, high-frequency CAP retention and longer life performance.
By AVX Corporation 312
Nexperia has designed common mode filters with electrostatic discharge protection for 1, 2, and 3 differential line pairs.
By Nexperia 470
KOA's SR731E-RT current sense resistors are ideal for use in outdoor environment applications in mining, agriculture, winemaking, and oil/gas.
By KOA Speer Electronics, Inc. 94
FERROXCUBE's TX series epoxy coated toroids are available in a wide range of sizes and materials for use in a broad range of applications.
By FERROXCUBE 95
Eaton Electronics' MPIAV2 series automotive AECQ miniature high-current inductors are ideal in applications such as body and navigation electronics.
By Eaton-Electronics Division 98
Eaton's 48 V 166 F XLR supercapacitor module offers high reliability, long life, maintenance free supercapacitor energy module designed for rugged environments.
By Eaton-Electronics Division 490
The KEMET METCOM metal composite inductors are ideal for use in DC/DC switching power supplies as power inductors as well as EMI filter inductors.
By KEMET 154
Ohmite's JR series of high-current jumpers rated up to 100 A provide a max resistance range of 0.5 m to 0.2 mΩ, minimizing effects on the designed circuit.
By Ohmite 164
Würth Elektronik WE-HCI series is known within the electronics market to be the top of the line, high-current inductor family.
By Würth Elektronik 75